Pall coalescing filter element HC8500FCN26Z hydraulic fuel system oil-water separation filter element

Product basic parameters and core materials

1. Product model: HC8500FCN26Z (Pall original HC8500 series standard coalescing filter element, interchangeable with the same specification of filtration equipment in the entire series, zero installation error)

2. Core functions: precise fluid impurity removal, micron level emulsified water coalescence and sedimentation, oil purification and purification, simultaneous interception of suspended particles and rust impurities, suitable for multi-media filtration conditions.

3. Suitable media: low viscosity clean fluids such as aviation light fuel, industrial diesel, hydraulic oil, lubricating oil, etc., suitable for multi scenario media purification in power plants, petrochemicals, and heavy industries.

4. Core filter material: Adopting Pall's same Coralon multi-layer gradient composite glass fiber filter material, with a layered gradient pore structure, the filtration area is increased by 50% compared to traditional filters, and the pollutant holding capacity is stronger, which can accurately capture micro particles and emulsified water droplets.

5. Structural dimensions: 26 inch standard extended structure, combined with reinforced inner and outer protective nets, with strong overall support, effectively resisting high-pressure oil flow erosion, and preventing filter material collapse, deformation, and delamination problems.

6. Pressure resistance performance: Rated withstand pressure difference of 0.6MPa, resistant to pipeline pressure fluctuations, equipment start stop impacts, long-term continuous high-pressure operation, excellent structural stability.

7. Temperature resistance range: Suitable for wide temperature conditions of -25 ℃ to 120 ℃, resistant to high and low temperature alternation, resistant to oil corrosion, and long-term immersion in oil without aging or failure.

8. Sealing configuration: High strength oil resistant rubber seals are used, which are suitable for long-term fluid immersion, anti swelling, anti leakage, and tightly installed to prevent oil leakage, water seepage, and pressure relief hazards.

9. Production process: Adopting fully automatic precision folding+high-temperature hot melt curing integrated molding process, no glue secondary bonding, uniform arrangement of filter materials, regular oil passage, no fiber shedding throughout the process, high filtration cleanliness.

Applicable industries and equipment operating conditions of the product

1. Purification of power equipment in power plants: Suitable for hydraulic lubrication systems and fuel delivery systems in thermal power plants, hydropower stations, and self owned power plants, continuously filtering oil impurities and trace moisture, protecting precision components of steam turbines and generator sets, and reducing equipment wear and tear failures.

2. Petroleum and petrochemical industry operating conditions: Suitable for circulating and filtering light fuel and process hydraulic oil in petrochemical production lines, removing dust, rust, emulsified impurities, and free water mixed in during production, storage, and transportation processes, stabilizing oil quality, and ensuring continuous and stable operation of production lines.

3. Hydraulic system of heavy machinery: Purification of hydraulic oil for large construction machinery, mining equipment, and complete power units, intercepting metal micro powder and oil sludge impurities generated by system wear, avoiding problems such as valve core jamming, oil circuit blockage, and hydraulic power attenuation.

4. Purification of Ship Power Fluid: Ship fuel supply, hydraulic control system filtration, suitable for high humidity, high salt spray, and easy water ingress conditions at sea, long-term coalescence dehydration, purification of oil, and extension of the service life of power equipment and hydraulic systems.

5. Industrial oil storage circulation filtration: Daily circulation purification of large-scale oil depots, oil storage stations, and industrial lubricant storage systems in enterprises, delaying oil oxidation and deterioration, removing trace pollutants, and reducing oil replacement losses.

Core competitive advantages of the product

1. Large capacity for dirt collection, long-lasting durability: The 26 inch extended filter material combined with an expandable filter structure has a dirt collection capacity far exceeding that of conventional short filter cartridges, with strong anti clogging ability, greatly extending the replacement cycle, and reducing the number of equipment downtime maintenance times.

2. Low pressure differential stable oil flow: Coralon modified filter material has excellent permeability, low original pressure differential, and no pressure build-up or flow attenuation under high flow and high load continuous operation conditions, which does not affect the overall efficiency of the equipment.

3. Dual medium adaptation, strong universality: It can simultaneously adapt to fuel and hydraulic oil purification, with one machine for multiple uses and multiple working conditions for equipment matching, reducing the procurement and stocking costs of enterprise filter cartridges.

4. High strength impact resistant structure: reinforced with inner and outer double-layer protective nets and integrated hot melt curing process, with excellent resistance to oil flow erosion, pressure fluctuations, and deformation, and long-lasting and stable performance under complex industrial conditions.

5. Non destructive original factory precise replacement: 1:1 replica of Pall's original factory size, installation structure, and sealing point position, without the need to modify the equipment, directly replace the original filter element on the machine, adapt to zero error, seal zero leakage.

6. Clean filtration without secondary pollution: no adhesive bonding design, tightly and stably structured filter material, no fiber shedding or impurity precipitation during use, ensuring the cleanliness of industrial oil and protecting precision equipment components.

Source factory production advantage

1. Precise replication of original factory technology: We have been deeply involved in the localization of Pall's entire range of filter cartridges for many years, and are proficient in the core processes of Coralon gradient filter material ratio, precision folding, and high-temperature curing, to eliminate common problems such as insufficient accuracy, short lifespan, and dehydration failure of counterfeit products on the market.

2. High cost-effectiveness and significant cost reduction: The source factory produces and sells its own products, eliminating the need for import agents and intermediaries to pay premiums. The price of domestic substitution is much lower than that of original imports, making it suitable for industrial enterprises to stock up in bulk and maintain regularly.

3. Worry free comprehensive quality inspection: Each batch of filter cartridges undergoes pressure difference, dehydration, sealing, and structural strength testing, and can provide free certificates of conformity, testing reports, and material certificates to meet the standards of engineering bidding and equipment annual inspection and acceptance.

4. Support customized non-standard working conditions: Customized upgraded filter elements with enhanced temperature resistance, corrosion resistance, and high pollutant absorption can be customized according to high temperature, high pressure, high pollution, and special medium working conditions, suitable for various complex industrial scenarios.

Frequently Asked Questions (FAQ)

Q1: What is the core difference between this filter element and a regular fuel filter element?

A: This product uses Pall's exclusive gradient filter material, which has a larger pollutant holding capacity and lower pressure difference. It also supports dual media filtration of fuel and hydraulic oil, balancing precision impurity removal and coalescence dehydration, and is suitable for industrial high-intensity working conditions. Its comprehensive performance far exceeds that of ordinary single function filters.

Q2: Can trace amounts of emulsified water in hydraulic oil be effectively removed?

A: Sure. Multilayer gradient fiberglass has excellent emulsion breaking and coalescence ability, which can capture micron sized emulsified water droplets in oil and coalesce and settle, effectively improving oil turbidity and excessive water content, and enhancing oil lubrication performance.

Q3: Will there be deformation and leakage during use under high pressure conditions?

A: No. Double layer mesh reinforcement structure+overall curing process, high compressive strength, stable structure under high pressure and pressure fluctuation conditions, tight sealing, no deformation, no leakage, and no water permeability failure problems.

Q4: Apart from Pall filter elements, what other oil filtration products do you have?

A: Our factory has a complete product line for oil filtration. In addition to Pall replacement filters, we also produce MAHLE, HYDAC, and Leemin series hydraulic filters, which are matched with mobile oil filter machine and coalescence dehydration filters to achieve integrated filtration of oil impurities and water.

Q5: What other filtering categories does the factory produce?

A: The source manufacturer covers industrial oil filtration, industrial water filtration, natural gas filtration, air filtration, and can produce imported replacement filters, domestic standard filters, and complete sets of filtration equipment. It supplies to multiple industries such as power, metallurgy, chemical, and gas.

You may also be looking for

1. Coalescing dehydration oil filter machine

2. Oil filter housing