Home > Products > AIR CLEANING > Medium high efficiency filter >

Medium high efficiency filter Introduction Technical data parameter Advantage Category display Equipment usage situation cases


Medium high efficiency filter

Medium high efficiency filter

It is mainly used to capture particulate dust and various floating objects in the air, as the end filter of various filtration systems. The ultra-fine glass fiber paper is used as the filter material, and the plastic sheet, aluminum foil board and other materials are folded as the splitting board and sealed with a new type of polyurethane sealant, and the galvanized sheet, Stainless steel plate and aluminum alloy profile are made of outer frame.

application Widely used in industrial and commercial heating and ventilation air conditioning systems Granules, floating dust, etc. in the air of the passing medium
Filter media: particulate matter in the air, floating dust, etc.
Email overseas@lefilter.com

Technical data parameter

Differential pressure: main workshop to adjacent room > 5PA illuminance: 300LX

Temperature: >16°C in winter, < 26°C in summer Volatility: +2°C

Noise:≤65dB (A) Fresh air supplementary volume: 10% - 30% of the total supply air volume

Air change times: 100000 class: 12-20 times/h 10000 class: 20-30 times/h 10003 class: 45-60 times/h Humidity: 45-65%, the humidity of GMP powder workshop is about 50%, and the humidity of electronic workshop is slightly higher to avoid static electricity


  • Medium high efficiency filter Advantage

    Light weight, good versatility, mainly used for: central air conditioning and central ventilation system pre filtration, large air compressor pre filtration, etc



    Stable structure, commonly used in primary filtration of air conditioning and ventilation systems, with stainless steel outer frame, high temperature resistance 250- 300 °C filtration efficiency. Light weight, good versatility, used for: central air conditioning, etc.

  • Medium high efficiency filter Advantage

    Mainly adopts hot melting process, stable structure, high dust holding capacity, large air volume, low resistance, and can be repeatedly cleaned and used


    Medium efficiency filter:

    Mainly used to capture 1-5um particle dust and various suspended solids.

  • Medium high efficiency filter Advantage

    Filter tiny dust particles to prevent short circuit of microelectronics and protect production environment, such as food industry, electronics industry, etc.


    Filter bacteria in the air:

    Air filters can be used in clean workshops, laboratories and clean rooms, and have the functions of filtering and dust-proofing.

  • Medium high efficiency filter Advantage

    Flexible material selection for different working conditions


    Wide range of use:

    According to the different needs and efficiency of air filters, they can be divided into primary filters, medium efficiency filters, high efficiency filters and sub-high efficiency filters.

Category display

(1) Primary air filter

There are four styles of plate type, folding type, bag type and box type. The outer frame materials include paper frame, aluminum frame, galvanized iron frame, and stainless steel frame. The filter materials include non-woven fabric, nylon mesh, activated carbon filter cotton, metal mesh, etc. The protective net has double-sided sprayed wire mesh and double-sided galvanized wire mesh. Inexpensive, light weight, versatile and compact.

Primary air filter application:
The primary air filter is suitable for central air conditioning and centralized ventilation system filtration; large air compressor filtration; clean return air system; pre-filtration of high-efficiency filtration devices.

Features of primary air filter:
1. The outer frame adopts a sturdy plate-type aluminum alloy frame, and a diamond-shaped protective net is added to the air outlet surface to ensure that the filter will not be deformed and cut in a poor working environment; lightweight plate-type structure.
2. The filter material is made of high-quality polyester synthetic fiber, which can be washed and reused for many times, with long service life, economical and practical, and the fluffy and gradually dense rectification structure ensures a high dust collection rate and a large dust holding capacity, effectively Extend the service life of its back-end medium-efficiency filter.
3. Different thicknesses of 1 inch (21mm, 25mm) are available, and filter grades can be selected: G1, G2, G3, G4 (EN779).

Primary air filter lefilter

(2) Medium-efficiency filter

It is widely used in the intermediate filtration of air-conditioning systems, and is suitable for occasions with high dust concentration. It adopts high-quality chemical fiber non-woven filter material and has a large dust holding capacity. It is mainly used to filter dust particles of 1-5μm, and has the advantages of small resistance and large air volume. Medium-efficiency filters include bag type, plate and frame, combined type, etc. The bag-type medium-efficiency air filter is made of ultra-fine synthetic fiber with a special weaving method to avoid the discomfort that the old glass fiber material may cause to the human body. The filter material contains electrostatic fibers, which can filter sub-micron (less than 1 or less than 1 micron) dust The efficiency is particularly good, the filtration efficiency of 1 micron particles is 85%, and it has high dust collection power, high dust load and high air permeability, and long service life.

Medium efficiency filter features:
Efficiency: F5-F9 (colorimetry);
Features: The filter material is made of fine glass fiber;
Uses: Widely used in pharmaceutical, electronics, food industries and general air conditioning systems.

Medium-efficiency filter

(3) HEPA filter

It is mainly used to capture particle dust below 0.5μm and various suspended solids. The glass fiber paper is used as the filter material, and the offset paper, aluminum film and other materials are used as the dividing plate, which is glued with the wooden frame aluminum alloy. Each unit has been tested by the nano-flame method, and has the characteristics of high filtration efficiency, low resistance, and large dust holding capacity. The air supply at the end of the air conditioner in the dust-free purification workshop of printing and other industries. Ultra-high-efficiency filters are used at the end of the clean room, and the structure can be divided into: high-efficiency with partitions, high-efficiency without partitions, high-efficiency air volume, ultra-high-efficiency filters, etc.

Outer frame: aluminum alloy
Filter material: superfine glass fiber filter paper
Separator: Hot Melt Adhesive
Protection net: steel mesh spray, white
Efficiency: Laser particle counting MPPS efficiency 99.95%, 99.995%, filter grade H13, H14
Operating temperature: < 70°C

HEPA filter

(4) W-type sub-high-efficiency air filter

1. High air volume type: Compared with ordinary high-efficiency filters, less filters can be used under the same air volume, reducing costs, reducing installation space and saving installation time.
2. High dust holding capacity, no partition design: The filter is made of ultra-fine, moisture-proof, fire-resistant glass fiber, and the thermoplastic spacer ensures the same pleat spacing, ensuring the best airflow to pass through with the least resistance. The same pleat spacing makes full use of the entire depth of the filter material to ensure greater dust holding capacity.
3. The V-type large air volume filter adopts ABS engineering plastic frame, which is light in weight and low in initial resistance. This filter screen is especially suitable for complex operating systems, such as: high wind speed system, variable air volume system, high humidity or corrosive environment and other special required system.
4. Temperature resistance: 80°C
5. Humidity: 100%
6. There are three types of filtration efficiency: high efficiency, sub-high efficiency and medium efficiency.
7. The frame is made of galvanized steel sheet or plastic, and the filter material is made of ultra-fine polypropylene filter paper or glass fiber filter paper.

W-type sub-high-efficiency air filters are widely used in industrial and commercial heating and ventilation air-conditioning systems, such as: office buildings, conference rooms, hospitals, shopping malls, gymnasiums, airports and other large civil buildings;

Ventilation and air conditioning systems; pre-filtration of centralized ventilation and air conditioning systems in general industrial workshops or clean rooms.

W-type sub-high-efficiency air filter

More models can be customized directly by consulting customer service.

More working conditions require companies to provide customized measurement services.

Equipment usage situation

  • pictures

  • Ship

  • video


  • Air filter for Muyuan farm
    Air filter for Muyuan farm

    Application: air filtrationFeatures: good sealing performance

  • Filter for a pharmaceutical factory
    Filter for a pharmaceutical factory in Henan

    Application: air filtrationFeatures: No leakage

  • Filter for central air conditioner
    Filter for central air conditioner in an office

    Application: air filtrationFeatures: high filtration efficiency


Provide customization services according to different working conditions