Aviation fuel pre filter element FO-644A2

Product Description

Coalescer cartridged designed for separation of highly dispersed emulsified water particles and removal of particulate contaminants from hydrocarbon fuel.

Item: Microfilters

P/N: FO-644A2 

Marking on filter end cap: FO-644A2

Packing box: brown blank carton + customized label

Structure: OPEN END

Gaskets: Buna-N

Dimensions:6” x 44” x 31 /2” ID

Material: Pleated - fiberglass

Filtration accuracy: 2micron

Maximum Flow Rate (GPM): 176

Supporting core: galvanized carbon steel

Max. differential pressure: 75psi

Changeout Pressure Differential:15 psi

Max. temperature: 250ºF (121°C)

PH range：5~9

Product Features: 

Cost effective particle and emulsified water removal from hydrocarbon fluids
- Easy installation and replacement with one-piece design
- Choice of Threaded Base or Open End cartridges
- Choice of All-Fiberglass Media or Combination Fiberglass and Pleated Media
- Field proven performance
- Ongoing qualification testing to meet changing commercial and military requirements
- Used as a first-stage cartridge in Filter/Separatos
- Remove particulates and coalesce water into large water drops
- Also available in screw base design

Application

Coalescer cartridges are used primarily to coalesce emulsified water and remove particles from hydrocarbon fluids. The largest single application is the filtration of aviation jet fuel. They are also used with other types of fuels, process streams in refineries and petrochemical plants, and condensate streams where natural gas is produced.

Other liquids can be separated if they are immiscible, the specific gravities differ, and high concentrations of surface active agents are not present. As a rule of thumb, if a sample of the mixture readily separates in an hour or two, a coalescer can probably be used. If the mixture hasn't separated after 24 hours, coalescing probably won't work.