Professional Separation Filter Element - Precise Separation & Multi - effect Purification Pioneer

Product Introduction

1. Adopts special filter membrane materials and structural designs to achieve efficient separation of different components in gases or liquids.

2. Can precisely intercept tiny particles, droplets, and specific molecules according to different separation requirements, ensuring the purity of the separated medium.

3. Compatible with a variety of separation equipment, widely used in separation processes of multiple fields such as chemicals, food, and environmental protection.

Working Process

1. Medium Inflow: The mixed gas or liquid to be separated enters the equipment with installed separation filter elements through pipelines.

2. Screening and Separation: Under pressure, small molecules and qualified substances in the mixed medium pass through the filter element, while the target substances to be separated are retained.

3. Collection and Discharge: The separated pure medium flows out and is collected from the other side of the filter element; the retained impurities and separated substances adhere to the surface of the filter element and are discharged regularly.

4. Status Monitoring: Continuously monitor the changes in pressure and flow before and after the filter element to determine the operating status of the filter element and the separation effect.

Product Features

1. High - precision Separation: The separation precision can reach 0.01μm, meeting the requirements of high - purity separation.

2. High Permeability: The special membrane pore structure design improves the medium passing efficiency while ensuring the separation effect.

3. Strong Chemical Stability: Can withstand a variety of acids, alkalis, and organic solvents, adapting to complex chemical environments.

4. Long - life Design: Optimized materials and processes extend the service life to 2 - 3 years under normal working conditions.

Technical Parameters

Item	Parameter Range
Separation Precision	0.01 - 10μm
Working Pressure	≤2.5MPa
Working Temperature	-20℃ - 120℃
Membrane Material	PVDF, PTFE, etc.
Applicable Media	Compressed air, chemical solvents, liquid mixtures, etc.

Application Areas

1. Chemical Industry: Solvent recovery and separation and purification of chemical raw materials.

2. Food and Beverage Industry: Wine clarification and juice concentration separation.

3. Environmental Protection Field: Separation of particulate matter and harmful components in waste gas.

4. Medical and Pharmaceutical Industry: Liquid medicine filtration and separation of biological agents.

FAQ

Question 1: How to select the appropriate precision for the separation filter element?
Answer: It is necessary to determine according to the composition of the medium to be separated, separation objectives, and subsequent process requirements. For example, to separate tiny particulate impurities, a precision below 0.1μm can be selected; if separating specific molecules, the corresponding precision should be selected according to the molecular size. It is recommended to consult professional personnel for selection.
Question 2: How to clean the separation filter element after it is blocked?
Answer: Select the cleaning method according to the composition of the blocked substances. Inorganic impurities can be soaked and rinsed with acid or alkali solutions; organic pollutants can be cleaned with special organic solvents. After cleaning, an integrity test is required. If the performance cannot be restored, the filter element needs to be replaced.

Conclusion

The professional separation filter element has become a key component for many industries to achieve medium purification and component separation with its precise separation performance and wide applicability. Its reliable quality and efficient separation effect can effectively improve production efficiency and ensure product quality.

Related Products

Microporous Pleated Filter

PP Melt-Blown Filter