Position: HOME > Product > Air Purification Products > Air Filter >
130 mm Diameter 2000 mm Length Filter Bag Cage Dust Collector Cage For Pharmaceutical And Food Dust Collection Systems
  • 130 mm Diameter 2000 mm Length Filter Bag Cage Dust Collector Cage For Pharmaceutical And Food Dust Collection Systems

130 mm Diameter 2000 mm Length Filter Bag Cage Dust Collector Cage For Pharmaceutical And Food Dust Collection Systems

Read 1 Reviews23 Q&As Write a Review
Filter bag cage in 130 mm diameter and 2000 mm length supports filter bags inside baghouse collectors, available in round, oval, flat and envelope styles with 8 to 24 vertical wires and galvanized or stainless construction.

PARAMETER

Brand Name: None
Model Number: φ130×2000 袋笼
Nominal filtration rating:配件(按配套滤袋)
Application:制药、食品、一般工业除尘器
Operating pressure:
Working temperature: 按材质与表面处理
Replacement or not:Replacement

Product Overview

The cage is the rib of a filter bag: it keeps the bag open against negative pressure and carries the pulse cleaning load. As part of the baghouse dust collector accessory range, cages are offered in round, oval, flat and envelope styles; materials include low carbon steel, galvanized steel and stainless steel; vertical wires from 8, 10, 12, 18, 20 up to 24; tops in roll flange, roll flange with venturi, roll band with groove, straight flange and multi-piece body design.

Basic Technical Parameters

Cage diameter130 mm
Cage length2000 mm (matches 133 × 2000 bag)
Cage styleRound, oval, flat, envelope
MaterialLow carbon steel / galvanized steel / stainless steel
Vertical wires8, 10, 12, 18, 20, 24 (or as required)
Cage topRoll flange, venturi type, groove band, straight flange
Surface treatmentGalvanizing, powder coat, antirust, Teflon, epoxy, silicone

Pharmaceutical And Food Scenario

In a pharmaceutical granulation room, the collector handles lactose and starch dust where carbon steel rust would contaminate the product. Stainless steel cages with Teflon or epoxy finish avoid corrosion and reduce bag abrasion, while the venturi top maintains pulse air distribution. In a food plant handling grain and sugar dust, round cages with 12 or 20 vertical wires support the bag without creating ridges where dust collects. Cage concentricity governs bag life: an oval cage inside a round bag wears the bag at the contact line, so dimensions are checked before pairing. Matching air cleaning equipment is specified from the same plate drawing.

Product Advantages

Uniform wire spacing and a rigid top ring keep the bag concentric, preventing localized abrasion and extending bag life. Surface treatments from galvanizing to Teflon suit corrosive and food-contact dust, and multi-piece body designs allow long cages to be shipped and assembled on site. Venturi tops improve pulse cleaning distribution and reduce compressed air consumption.

Manufacturer And Factory Strength

Cage welding, wire spacing and finish coating are controlled in-house, with each batch checked for diameter, length and top ring fit against the bag specification. Bags, cages and pulse accessories ship together so a shutdown gets one delivery, and the group's hydraulic filter cartridge line covers fluid-side spares. For cage drawing review and bag pairing, contact our engineering team, and see the medium efficiency air filter range for downstream stages.

FAQ

Q1: Why does cage quality affect bag life?
A1: A cage that is out of round, has sharp wire ends or a loose top ring rubs the bag during pulse cleaning and causes early failure.

Q2: Which material for food and pharmaceutical dust?
A2: Stainless steel with Teflon or epoxy finish, to avoid rust particles entering the product stream.

Q3: How many vertical wires are typical?
A3: 8 to 12 for short bags, 18 to 24 for longer cages where bag support and pulse load are higher.

Q4: What is a venturi top for?
A4: It accelerates pulse air into the bag center and improves cleaning distribution, lowering compressed air use.

Q5: Can long cages be shipped assembled?
A5: Multi-piece body design allows splitting for transport and rejoining on site without loss of straightness.

Reference: GB/T 6719 bag cage and baghouse accessory requirements | baghouse dust collector


{sval:sql sql='SELECT n_parameter FROM dede_addonarticle WHERE aid = ~aid~ ' } {/sval:sql}
{sval:sql sql='SELECT n_parameter FROM dede_addonarticle WHERE aid = ~aid~ ' } {/sval:sql}