Oil Purification products
Air Compressor Filter
Air Compressor Inline Filter
Water purification equipment
Air Purification Products
Brand Name: None
Model Number: LF/P3275
Nominal filtration rating:按介质等级(ISO 16890 分级)
Application:木工砂光、颜料与粘性粉尘
Operating pressure:
Working temperature: ≤120℃
Replacement or not:Replacement
Where cellulose media cannot release sticky dust, the polyester cartridge takes over. Part of the dust extraction equipment consumable range, it is built from 100% spun bond polyester with options for antistatic treatment, oil and water repellent treatment, and PTFE membrane. Applicable temperature reaches 120 ℃. LF/P3275: OD 324 mm, ID 213 mm, length 750 mm, matching the standard 324 mm cartridge plate.
| Model | LF/P3275 |
| Outer diameter | 324 mm |
| Inner diameter | 213 mm |
| Length | 750 mm |
| Media | 100% spun bond polyester |
| Treatment options | Antistatic / oil and water repellent / PTFE membrane |
| Applicable temperature | 120 ℃ |
| Features | Washable, wide pleat spacing, smooth surface |
In a furniture panel line, sanding dust mixes with resin mist and forms a sticky cake that blinds paper media within days. Wide pleat spacing and the smooth spun bond surface let the cake release during pulse cleaning, and the oil and water repellent treatment stops resin from wetting the fiber. In paint and pigment plants, the PTFE membrane version handles fine pigment that would otherwise penetrate the depth of the media. Because the cartridge is washable, maintenance teams can clean it in place between scheduled replacements, and final air can pass a bag filter before recirculation.
Spun bond polyester resists electric conductance, oil and water, giving stable performance in mixed dust and mist streams. The PTFE membrane provides excellent dust cake release and keeps efficiency high after repeated cleaning. Wide pleat spacing lowers the risk of pleat bridging on sticky dust, and the 120 ℃ rating covers warm process exhaust that would damage cellulose media.
Polyester, antistatic and PTFE membrane cartridges are pleated on the same line, so a workshop can standardize one dimension across several collectors. Each batch is checked for pleat spacing, cap bond strength and gasket fit. For sites that also run bag filtration, the plant supplies baghouse dust collector bags and cages to the same specification, and fluid-side spares follow the hydraulic filter cartridge programme. Send dust sample data or the OEM part number, then contact our engineering team.
Q1: Why choose polyester over cellulose for wood dust?
A1: Polyester releases sticky resin cake and tolerates washing, while cellulose tends to blind and cannot be washed.
Q2: When is the PTFE membrane version necessary?
A2: For fine pigment and submicron sticky dust where surface filtration instead of depth loading is preferred.
Q3: Is the cartridge antistatic?
A3: An antistatic variant is available for dust with static accumulation risk; specify it at order.
Q4: What temperature can it take?
A4: 120 ℃, well above the 65 ℃ cellulose limit, which suits warm sanding and coating exhaust.
Q5: Can it be washed on site?
A5: Yes, low pressure water washing is acceptable for polyester media; dry fully before refitting to avoid cake adhesion.
Reference: ISO 16890 air filter efficiency classification | air cleaning
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()