Position: HOME > Product > Air Purification Products > Air Filter >
LF Z3266 Cellulose Air Filter Cartridge 324 mm OD 660 mm Length For Shot Blasting And Mining Dry Dust Collection
  • LF Z3266 Cellulose Air Filter Cartridge 324 mm OD 660 mm Length For Shot Blasting And Mining Dry Dust Collection

LF Z3266 Cellulose Air Filter Cartridge 324 mm OD 660 mm Length For Shot Blasting And Mining Dry Dust Collection

Read 1 Reviews23 Q&As Write a Review
LF Z3266 cellulose air filter cartridge measures 324 mm OD, 213 mm ID and 660 mm length with φ14 hole, working to 65 ℃ for shot blasting, mining and dry granular dust collection.

PARAMETER

Brand Name:
Model Number:
Nominal filtration rating:
Application:
Operating pressure:
Working temperature:
Replacement or not:Replacement

Product Overview

Cellulose cartridges are the standard option inside our air cleaning consumable range. Media options include 100% cellulose, cellulose polyester blend, and cellulose with flame retardant treatment; applicable temperature is 65 ℃. The cartridge uses electro-galvanized steel top and bottom caps, galvanized inner and outer mesh for support and corrosion resistance, seamless urethane gasket for airtight sealing, and olive-shape pleats that maintain uniform spacing. LF/Z3266: OD 324 mm, ID 213 mm, length 660 mm, hole diameter φ14.

Basic Technical Parameters

ModelLF/Z3266
Outer diameter324 mm
Inner diameter213 mm
Length660 mm
Hole diameterφ14 mm
Media options100% cellulose / cellulose-polyester blend / flame retardant cellulose
Applicable temperature65 ℃
Caps and meshElectro-galvanized steel plate, galvanized mesh

Shot Blasting And Mining Scenario

A shot blasting cabinet recirculates steel grit and generates a dry, abrasive dust that destroys ordinary filter media at the pleat edge. The cellulose cartridge with galvanized outer mesh holds the abrasive stream at the surface, and uniform pleat spacing prevents pleat collapse under repeated pulse cleaning. In mining and mineral handling, the same cartridge fits standard 324 mm cartridge plates for crusher house and transfer point collectors. Because the dust is dry and granular, cellulose media releases the cake cleanly, and replacement follows the cartridge count on the collector plate rather than guesswork. Downstream polishing can use a high efficiency air filter stage.

Product Advantages

Uniform pleat spacing from the olive-shape design maintains the full filter surface instead of letting adjacent pleats touch. Galvanized steel caps and mesh resist rust in humid workshops, and the seamless urethane gasket keeps the seal airtight against bypass. Low energy consumption per cubic meter of air is achieved by the large surface in a compact cartridge, and three media variants let one dimension serve general, blended and flame-retardant duty.

Manufacturer And Factory Strength

Cartridge pleating, cap bonding and gasket fitting run on dedicated lines, with each batch checked for pleat height and seal seating. Cellulose, polyester and PTFE media are stocked together, so mixed-media orders ship on one cycle. For collectors that also need bag filtration, the same plant supplies the baghouse dust collector and its bags, while fluid-side customers draw on the hydraulic filter cartridge range. Send the housing plate drawing or the OEM cartridge number, then contact our engineering team for cross-check.

FAQ

Q1: Does LF/Z3266 fit a standard 324 mm cartridge plate?
A1: OD 324 mm and ID 213 mm match the common plate; confirm hole diameter and gasket type against the plate drawing.

Q2: What is the maximum working temperature?
A2: 65 ℃ for cellulose media; higher temperature dust requires polyester or high-temperature media grades.

Q3: Why is flame retardant cellulose offered?
A3: For dust streams with ember risk such as welding and grinding sparks, the flame retardant treatment reduces ignition of the media.

Q4: Can the cartridge be washed and reused?
A4: Light compressed air cleaning from the inside out is acceptable; water washing is not recommended for cellulose media.

Q5: What does the φ14 hole refer to?
A5: It is the center hole diameter for the mounting bolt or yoke on the cartridge plate; verify before ordering a replacement.

Reference: ISO 16890 air filter classification for particulate matter efficiency | air cleaning


{sval:sql sql='SELECT n_parameter FROM dede_addonarticle WHERE aid = ~aid~ ' } {/sval:sql}
{sval:sql sql='SELECT n_parameter FROM dede_addonarticle WHERE aid = ~aid~ ' } {/sval:sql}