Position: HOME > Product > Oil Purification products >
PCHG Standard Coalescer Cartridge For General Natural Gas Pipeline Dewatering
  • PCHG Standard Coalescer Cartridge For General Natural Gas Pipeline Dewatering
  • Gradient fiberglass coalescer filter element cross-section
  • Bulk PCHG gas filter warehouse stock
  • Single PCHG coalescer filter end cap photo
  • PCHG coalescer cartridge white background full cartridge

PCHG Standard Coalescer Cartridge For General Natural Gas Pipeline Dewatering

Read 1 Reviews23 Q&As Write a Review
PCHG standard coalescer cartridge is mainstream coalescer filter, removes emulsified water from natural gas for medium gas gathering stations.

PARAMETER

Brand Name:
Model Number: PCHG12, PCHG24, PCHG36, PCHG72, PCHG312, PCHG336, PCHG536
Nominal filtration rating:0.1μm, 0.3μm, 0.5μm, 1μm, 5μm, 10μm
Application:medium gas gathering station, compressor station, small LNG pretreatment
Operating pressure:
Working temperature: -20℃ ~ 116℃
Replacement or not:Replacement

Medium-scale natural gas station operators always face the problem of short service life of low-quality coalescer cartridge. Ordinary thin-layer coalescer filter cannot fully coalesce tiny water mist mixed in raw gas, leading to frequent compressor corrosion and unplanned shutdown. LEFILTER PCHG series standard coalescer filter cartridge adopts multi-gradient glass fiber as core coalescer filter element, which greatly improves liquid coalescing capacity of this coalescer cartridge filter. As the core dewatering component of medium-flow natural gas filter system, PCHG works with JFG gas filter element as front solid interception, and matches ST small separator cartridge for secondary liquid blocking. All PCHG models are mass production standard models in our filter catalog, you can check full gas purification consumables via gas filter element page, supporting RO membrane and UF membrane module are displayed on Water Filter Element.


Working Principle Of PCHG Coalescer Cartridge


Raw natural gas flows from outside to inside through PCHG coalescer filter cartridge. The outer coarse fiber layer of coalescer filter element intercepts pipeline rust and large solid particles; the middle gradient fiber captures micron-level emulsified water mist, and tiny droplets collide and aggregate into large water beads by coalescence effect. After separation, dry gas flows through the central tube and enters downstream separator filter element to avoid liquid re-entrainment. The uniform winding process of this coalescer cartridge filter keeps stable low pressure drop under long-term operation, which is more reliable than inferior single-layer coalescer filter used in common gas cartridge filter vessels.


PCHG standard coalescer cartridge complete product shot


Core Technical Parameters


  • Filter Media: Multi-gradient phenolic fiberglass for coalescer filter element

  • Optional Precision: 0.1/0.3/0.5/1/5/10μm for coalescer cartridge filter

  • Max Working Pressure: 3.4MPa for general natural gas filter

  • Replacement Differential Pressure: 12–15psid of coalescer filter cartridge

  • Matching Parts: JFG gas filter element, ST separator cartridge

Each batch of PCHG coalescer cartridge passes liquid holding aging test before delivery, fully interchangeable with PECO and Faudi standard filter separators, compatible with all Oil & Gas Purification Equipment medium station skids.


Gradient fiberglass coalescer filter element internal detail


4 Unique Advantages For Medium Gas Stations


1 Multi-Layer Coalescing Media
Stratified fiber greatly improves water capture efficiency of coalescer filter cartridge.

2 Long Stable Service Cycle
Slow saturation reduces replacement frequency of coalescer cartridge filter.

3 Mild Sour Gas Compatibility
Acid-resistant fiber adapts general sour natural gas filter raw gas.

4 Universal Standard Size
Direct replacement without modifying original filter housings.


Application Scenarios


PCHG coalescer cartridge is the standard dewatering core of medium gas gathering stations and small LNG pretreatment units, cooperates with gas filter element and separator filter cartridge to protect compressors from water corrosion damage.


Full PCHG Series Model List


Full Model No.Specification Introduction
PCHG12Short small filter, for small flow natural gas filter separator
PCHG24General basic model, widely used in medium & small gas gathering stations
PCHG36Extended standard filter, higher flow rate than PCHG24, medium station standard
PCHG72Extra long single cartridge, large single flow capacity, reduce cartridge quantity inside vessel
PCHG3123pcs short filter assembly, match multi-cartridge small filter housing
PCHG3363pcs extended standard filter kit, special for medium 3-core filter separator
PCHG5365pcs extended standard filter set, supporting large capacity 5-core natural gas coalescer separator

Other Related Products


JMG Large Flow Coalescer Cartridge


FAQ About PCHG Coalescer Cartridge


Q1 What’s the difference between PCHG and JFG?
A1 PCHG is professional coalescer cartridge filter for removing water mist; JFG is only solid interception gas filter element without coalescing function.

Q2 Can PCHG be used for aviation kerosene?
A2 CA series is special aviation coalescer filter cartridge, PCHG mainly matches natural gas pipelines.

Q3 What pressure value to replace PCHG coalescer cartridge?
A3 Replace when differential pressure rises to 12–15psid.

Q4 Is PCHG interchangeable with imported filter elements?
A4 All dimensions match PECO standard filter separators for direct replacement.


{sval:sql sql='SELECT n_parameter FROM dede_addonarticle WHERE aid = ~aid~ ' } {/sval:sql}
{sval:sql sql='SELECT n_parameter FROM dede_addonarticle WHERE aid = ~aid~ ' } {/sval:sql}