JMG‑536 Large‑Flow Coalescer Cartridge For Trunk‑Line Natural Gas

When talking about high‑throughput gas‑phase purification for long‑distance pipelines, our Coalescer Filter product JMG‑536 coalescer cartridge pairs perfectly with Oil Filtration Machine‑based gas‑processing skids. Many trunk‑line projects report premature failure of ordinary narrow‑pleat coalescer filter when facing heavy liquid‑droplet load. LEFILTER JMG‑536 wide‑pleat coalescer filter cartridge is flagship heavy‑duty coalescer filter element inside our official catalog. This coalescer cartridge filter gains 60 % higher liquid‑holding capacity compared to standard‑size PCHG‑type coalescer filter. As dedicated de‑liquid consumable for large‑scale natural gas filter facilities, JMG‑536 works with JFG heavy‑duty gas filter cartridge for pre‑solid‑filtration and ST large‑size separator cartridge to build three‑stage full purification train. Check complete gas‑filtration portfolio at gas filter element.

Working Principle of JMG‑536 Coalescer Cartridge

Mass‑volume raw natural gas flows from outer side toward inner core passing JMG‑536 coalescer filter cartridge. Widely‑spaced multi‑layer gradient‑density coalescer filter element enlarges gas‑fiber contact area significantly, fully coalescing numerous tiny emulsified water mist into gravity‑settling large droplets. Outer thick fiber layer traps solid contaminants so as not to scratch delicate inner media of this coalescer cartridge filter. After coalescing treatment, dried‑out gas enters downstream separator filter element for preventing secondary liquid re‑entrainment. Optimized low‑resistance wide‑pleat layout of coalescer filter greatly cuts compressor power‑loss for long‑distance gas filter trunk‑lines.

Core Technical Specifications

• Filter Media：Wide‑pleat gradient fiberglass for coalescer filter element

• Selectable Precision：0.2 /0.5 /1μm of coalescer cartridge filter

• Max Working Pressure：4.0MPa for large‑trunk‑line natural gas filter

• Service‑Life Improvement：60 % longer than conventional small‑size coalescer filter cartridge

• Matching Parts：JFG‑series gas filter element, ST‑series separator cartridge

Each JMG‑536 coalescer cartridge has completed long‑time liquid‑fouling aging test before ex‑factory delivery. It can directly fit large‑scale PECO filter‑separator housings and matches all Oil Filtration Machine large‑station skid‑mounted systems.

Trunk‑Line‑Oriented Product Strengths

1 Super‑Large Liquid‑Storage Volume
Wide‑pleat construction extends replacement interval for coalescer filter cartridge.

2 Ultra‑Low Flow‑Resistance Characteristic
Reduce continuous‑running power‑cost of trunk‑line gas filter compressors.

3 Sour‑gas Adaptability
Anti‑corrosion fiberglass fits high‑H₂S pipeline for coalescer cartridge filter.

4 Ultrasonic‑Sealed Fiber‑End
Stop fiber‑shedding risk of coalescer filter element.

5 Drop‑In Large‑Vessel Compatibility
No housing reconstruction required for existed big filter‑separator equipment.

Application Scenarios

JMG‑536 coalescer cartridge serves as mandatory core‑filter for long‑distance natural‑gas trunk‑pipelines and LNG receiving terminals, working together with gas filter element and separator filter cartridge to protect high‑precision pipeline instruments against liquid‑induced corrosion damage.

Full Model List

Full Model No.	Specification Introduction
JMG‑336	3‑core medium‑large‑flow coalescer cartridge, medium‑trunk filter‑separator housing
JMG‑536	5‑core standard large‑flow coalescer filter cartridge, central compressor‑station
JMG‑572	5‑core extra‑long coalescer filter element, ultra‑high single‑set throughput
JMG‑672	6‑pieces long‑filter assembly, dedicated for big‑size LNG pretreatment skid
JMG‑7272	72‑inch super‑long single‑element coalescer cartridge filter, ultra‑high‑flow trunk‑line exclusive

Other Related Products

PCHG‑24 Standard Coalescer Cartridge

FAQ

Q1: When should I select JMG‑536 instead of PCHG‑24?
A1: JMG‑536 targets ultra‑high‑throughput long‑distance trunk‑line; PCHG‑24 fits medium‑small gas‑gathering‑stations.

Q2: Which gas filter element matches JMG‑536?
A2 JFG‑series heavy‑duty pre‑filter gas cartridge filter.

Q3: Max continuous‑operating‑temperature for JMG‑536 coalescer cartridge filter?
A3 Stable continuous‑operation up to 118℃ hot raw‑gas pipeline.

Q4: Is JMG‑536 interchangeable for imported large‑filter‑separator parts?
A4 Outer‑dimensions fully match big‑PECO vessels without equipment‑modification.