Parker RCP 045 60 N PP Replacement High Flow Filter Element 4.5 Micron 60 Inch For Microelectronics Pre RO And Resin Trap Filtration

Product Overview

Water Filter Element replacement line also covers Parker RCP/RMG high-flow numbers, and the Parker RCP 045 60 N PP replacement element is a PP 4.5 micron 60 inch cartridge under Water Filter Element. It reproduces the RCP high-flow interface for microelectronics duty: pre-RO filtration, cooling water, resin trap filtration, and wet etching and cleaning water. The 60 inch length suits high-volume clean-water loops where a small element rack would occupy valuable fab space.

Basic Technical Parameters

Cross-reference	Parker RCP 045 60 N PP
Media / rating	PP, 4.5 μm
Length	60 inch (1524 mm)
Typical duty	Pre-RO, cooling water, resin trap, wet etching cleaning

Microelectronics Scenario

Inside a semiconductor fab, the pre-RO loop protects the RO membrane from particles carried in municipal make-up, and the microelectronics pre RO filter catches fine particulate before SDI rises past membrane limits. In the ion-exchange loop, a resin trap cartridge catches broken resin beads that would otherwise travel to point-of-use equipment; the 4.5 micron grade holds bead fragments without starving the loop. Cooling water and wet-etching cleaning lines use the same geometry to standardize spare parts across the fab. Related high-flow cross-references including RMG glass-fiber versions sit on High Flow Filter Cartridge.

Product Advantages

Direct RCP interface interchange keeps fab change-out on the OEM schedule with zero vessel modification. The 4.5 micron PP grade balances fine retention and flow for pre-RO duty, and 60 inch length cuts element count per housing. Batch seal and dimensional checks prevent bypass leakage, which matters because a single bypassed particle can trigger defect review in clean-water systems. Mixed RCP/RMG part numbers can be consolidated on one order.

Manufacturer And Factory Strength

Our replacement programme documents each cross-reference against OEM part lists (PALL HFU, Parker RCP/RMG, 3M HF/HFM, Pentair ALN), and samples are available for fab trial before bulk commitment. Traceable batch records support fab quality audit files. Engineering support for pre-RO element count and resin-trap rating selection is available when you contact our engineering team; the oil-side equivalent programme is at replacement imported filter element.

FAQ

Q1: Is RCP 045 60 N PP a PP or glass-fiber element?
A1: RCP denotes PP media; the glass-fiber counterpart in the same family is RMG, e.g. RMG 045 60 N PP.

Q2: What role does a resin trap play in an ion-exchange loop?
A1: It captures fractured resin beads leaving the exchanger, preventing them from reaching RO membranes or point-of-use equipment.

Q3: Does this element meet fab cleanliness documentation needs?
A1: Batch traceability records and test reports are supplied; confirm food/electronic-grade documentation requirements at order.

Q4: Can it replace the RMG glass-fiber version directly?
A1: Only when media and rating match; PP and glass-fiber differ in chemical compatibility, so confirm the OEM part before substitution.

Q5: Are other RCP ratings available?
A1: RCP 008 20 N PP (0.8 μm, 20 in) and RCP 010 40 N PP (1.0 μm, 40 in) are listed in the catalogue.

Reference: SEMI F63 ultrapure water filtration guideline