PALL HFU640UY100J Replacement High Flow Filter Element 10 Micron PP 40 Inch For Refinery Produced Water And Coalescer Protection

Product Overview

Water Filter Element replacement programme covers imported high-flow part numbers, and the PALL HFU640UY100J replacement element is a PP 10 micron 40 inch cartridge listed under Water Filter Element. It reproduces the original interface and flow direction for the HFU high-flow housing, and serves refinery upstream condensate, produced and injection water, feedstock applications and coalescer protection. PP media, 40 inch length, 10 micron rating, matching the OEM part number HFU640UY100J.

Basic Technical Parameters

Cross-reference	PALL HFU640UY100J
Media / rating	PP, 10 μm
Length	40 inch (1016 mm)
Flow direction	High-flow inside-out standard interface
Typical duty	Produced water, injection water, feedstock, coalescer protection

Refinery Produced Water Scenario

In refinery produced-water and injection-water skids, suspended silt and scale particles would otherwise plug the reinjection pump and foul downstream coalescers. The refinery produced water filter sits upstream of the coalescer vessel, taking the particle load so the coalescer media works on liquid separation instead of dust. On feedstock transfer lines, it protects metering equipment from particulate carryover. Because the element matches the HFU housing interface, the change-out follows the same procedure as OEM stock without modifying the vessel; the broader replacement list lives under High Flow Filter Cartridge.

Product Advantages

Direct interface interchange means no adapter parts and no housing modification. PP media handles typical refinery water duty at the stated rating, and the high-flow geometry keeps pressure drop low at skid flow. Batch-tested seal seating avoids bypass at the seat, and element count per vessel is taken from the original OEM arrangement so flow balance is preserved. Mixed part-number orders (HFU640UY020J, HFU640UY045J, HFU640UY200J, HFU640UY400J etc.) are supplied on one purchase cycle.

Manufacturer And Factory Strength

Our high-flow replacement line cross-references PALL HFU, Parker RCP/RMG, 3M HF/HFM and Pentair ALN part numbers, and each batch is checked for dimensional fit and seal condition before dispatch. The factory supports sample trial and bulk EPC order for refinery stations. For cross-reference verification, send the OEM tag and housing photo; contact the team at contact our engineering team, and view the oil-side counterpart at replacement imported filter element.

FAQ

Q1: Does HFU640UY100J fit the original PALL housing directly?
A1: Interface, length and seal follow the OEM part; send the housing drawing for written cross-reference confirmation before bulk order.

Q2: What does this element protect in a refinery skid?
A1: It traps particles upstream of the coalescer and injection pump, extending coalescer media life and protecting pump seals.

Q3: Are other HFU ratings available?
A1: Yes, HFU640UY020J (2 μm), HFU640UY045J (4.5 μm), HFU640UY200J (20 μm) and HFU640UY400J (40 μm) are listed in the catalogue.

Q4: Is it suitable for seawater injection?
A1: PP media handles particle duty; confirm seal and housing metallurgy for chloride exposure before specification.

Q5: Can one order mix different HFU part numbers?
A1: Yes, mixed ratings across one station are consolidated on one PO with per-line part-number listing.

Reference: API RP 12J produced water treatment practice