Parker High Flow Water Filter Industrial 6-inch High Flux Folding Filter Cartridge

Product basic parameters and core materials

1. Product series: Parker high flow water filter element series, industry standard 6-inch large diameter specification, fully compatible with Parker's original high flow filter housing, with strong equipment interchangeability.

2. Core filter material: Industrial grade multi-layer gradient polypropylene pleated filter material is used, combined with a pre filtration layer to form a layered interception structure, with uniform pores, sufficient dirt holding space, and excellent anti clogging performance.

3. Filtration accuracy: covering a full range of accuracies of 0.8 μm, 1 μm, 5 μm, 10 μm, 20 μm, and 50 μm, with an absolute filtration efficiency of up to 99.98%, meeting industrial precision water purification standards.

4. Conventional specifications: Mainstream 20 inch, 40 inch, 60 inch extended sizes, large-diameter cylinder expansion design, single effective filtration area far exceeding conventional folding filter cartridges, suitable for water supply needs of large equipment.

5. Flux performance: The maximum flux of a single 60 inch filter can reach 114m ³/h, significantly reducing the number of cores installed under the same water treatment capacity, effectively simplifying the configuration of the filtration system.

6. Filtration flow direction: In the standard in/out filtration mode, all impurities are locked inside the filter element to prevent contamination caused by dropping during replacement, ensuring the cleanliness of the backend pipeline and membrane components.

7. Pressure and temperature resistance: The rated working pressure is 0.4MPa, and the maximum temperature tolerance is 80 ℃. It can stably adapt to industrial water bodies at room temperature and medium temperature, and has outstanding resistance to pressure fluctuations and water flow impacts.

8. Chemical adaptation: Made of high-purity polypropylene material, it is resistant to weak acid, weak alkali, and salt solution corrosion, and does not react with conventional process water or mild chemical media. It is suitable for complex working conditions in multiple industries.

9. Sealing process: Integrated hot melt sealed end cap, matched with original factory grade sealing rubber ring, tightly adheres to the shell, eliminates water flow short circuit, leakage, and filtration problems, and ensures stable filtration accuracy without attenuation.

Applicable industries and equipment operating conditions of the product

1. Pre treatment system for seawater desalination: As the core high flux filtering element in the front-end of seawater desalination projects, it efficiently intercepts seawater sediment, floating impurities, and suspended colloids, reduces influent turbidity, comprehensively protects the back-end reverse osmosis membrane group, and greatly extends the service life of membrane elements.

2. Industrial water treatment in power plants: Suitable for precise filtration of boiler makeup water, circulating cooling water, and condensate water in power plants, effectively removing rust, metal particles, and suspended solids from the water body, preventing heat exchanger scaling and pipeline blockage, and ensuring stable operation of the generator set.

3. Petrochemical process filtration: Pre filtration of refining process water, circulating return water, and mild chemical liquids, suitable for continuous high-intensity industrial operation conditions, stabilizing the cleanliness of process water bodies, and ensuring uninterrupted operation of production lines.

4. Municipal and large-scale water supply projects: Municipal waterworks, centralized water supply in industrial parks, and large-scale commercial water purification equipment with high flux precision filtration, with the advantages of fewer filter elements, high flux, and low operation and maintenance, are suitable for large-scale water supply purification scenarios.

5. Food and pharmaceutical pure water system: Pre filtration of purified water equipment for beverages, beer, and pharmaceuticals, relying on the characteristics of no precipitation and high cleanliness of filter materials, ensures that production water meets food and pharmaceutical safety standards under the premise of ultra high flux water supply.

Core competitive advantages of the product

1. Ultra large single flux, minimalist and efficient system: With a 6-inch large-diameter expansion design, it has extremely strong water flow capacity. Under the same water treatment load, the number of filter elements used is reduced by more than 60%. The equipment shell is smaller, occupies less space, and the system operation and maintenance are simpler.

2. Gradient filter material is anti fouling and durable, with a long service life: it has a multi-layer gradient pore structure, which gradually shares the impurity load layer by layer, making it less prone to rapid surface blockage. Its dirt holding capacity far exceeds that of ordinary filter elements, effectively extending the replacement cycle and reducing downtime frequency.

3. Low pressure loss energy-saving operation: The wrinkles are evenly arranged and transparent, the water flow resistance is small, the pressure difference is stable and does not soar under high flow conditions, the equipment operates with lower energy consumption, and the long-term energy-saving effect is significant.

4. Core replacement is clean and free of secondary pollution: with a dedicated structure for both inside and outside, impurities are completely retained inside the filter element, and there are no impurities falling off during disassembly and replacement, effectively avoiding the risk of secondary pollution in the equipment chamber and rear pipeline.

5. Broad spectrum working condition adaptation, strong stability: Balanced temperature and corrosion resistance, suitable for various working conditions such as seawater, circulating water, process water, mild chemical media, etc., long-term continuous operation without delamination, deformation, or accuracy attenuation.

6. Non destructive original replacement, easy to adapt: 1:1 replica of Parker's original factory size, sealing point position, and flow structure, no need to modify equipment, directly replace the original filter element on the machine, adapt to zero error and zero operation failure.

Frequently Asked Questions (FAQ)

Q1: What is the difference in advantages between Parker high flow filter and ordinary small water filter?

A: The core advantage lies in flux and operational efficiency. Parker's high flow filter can replace dozens of conventional 2.5-inch small filters with a single flux, significantly reducing the number of cores installed, shrinking equipment volume, and lowering manual core replacement costs. It is more suitable for long-term operation of large-scale industrial water purification projects.

Q2: What core operating conditions is the Parker high flow filter suitable for?

A: It focuses on large-scale, large water volume, and continuous operation conditions, with a focus on adapting to seawater desalination pretreatment, power plant circulating water and boiler makeup water, petrochemical process water, municipal centralized water supply, and pre fine filtration of large pure water units. It is the preferred filter element for large-scale water treatment systems.

Q3: What are the advantages of an in out structure compared to an in out structure?

A: All impurities are trapped inside the filter element, so they will not fall and contaminate the equipment tank and rear membrane components during core replacement, resulting in higher cleanliness during operation and maintenance; At the same time, impurities are intercepted layer by layer from the inside out, resulting in higher utilization of the contaminated space and longer lifespan of the filter element.

Q4: Can the temperature and pressure resistance performance of the filter element meet the requirements for continuous industrial operation?

A: Fully met, with a standard temperature resistance of 80 ℃ and a pressure resistance of 0.4MPa. It can withstand frequent start stop, flow shock, and pressure fluctuations in pipelines. It can operate continuously for a long time without folding or collapsing, and the seal does not leak. The working stability is excellent.

Q5: What categories of water filtration products does your company offer?

A: Our water filtration product system is complete, mainly divided into two categories: water treatment equipment and filter element membrane components. It can meet the full range of industrial water purification, sewage pretreatment, fine filtration, and deep purification requirements in one stop. The equipment category includes: basket filter, hand brush filter, multi-media filter (sand filter/activated carbon filter), precision security filter (bag filter, filter cartridge filter), fully automatic self-cleaning filter, dosing system (scale inhibition, sterilization, pH adjustment device), dissolved air flotation machine (DAF), plate and frame filter press, reverse osmosis system and other complete water treatment equipment. The filter element and membrane component category includes: 0.1-100 μm precision PP melt blown filter element, PP folding filter element, wire wound filter element, high flow filter element, PALL, Parker, 3M, Pentair and other imported brand replacement filter elements, as well as core filter elements such as RO reverse osmosis membrane and UF ultrafiltration membrane. The category is complete and suitable for various industrial water treatment projects.

Q6: What filtering services does your company's overall main business scope include?

A: Our company focuses on three core filtration areas: oil filtration, water filtration, and air purification, covering the entire industrial fluid purification scene. The oil filtration section includes various high-precision oil-water separation filter elements, industrial oil filters, and matching replacement filter elements, suitable for fuel, hydraulic oil, and lubricating oil purification conditions; The water filtration section includes a complete set of water treatment equipment, RO pure water equipment, seawater desalination equipment, various water filtration filters, RO membranes, UF membranes, and consumable accessories, meeting the needs of water purification, reclaimed water reuse, and wastewater treatment; The air purification sector includes industrial self-cleaning air filters, dust removal filter cartridges, dust removal bags and other dust removal and purification consumables and equipment, which are widely suitable for industrial and mining dust removal, equipment intake filtration, workshop air purification and other scenarios. We can provide one-stop integrated filtration solutions for equipment, filter cartridges, customization, and after-sales service.