Oil Purification products
Air Compressor Filter
Air Compressor Inline Filter
Water purification equipment
Air Purification Products
Brand Name: PALL
Model Number: HFU640UY010J
Nominal filtration rating:10μm
Application:Power plant boiler make‑up water RO pre‑filtration
Operating pressure:
Working temperature: 5‑52℃
Replacement or not:Replacement
Water Filter Element contains full‑range large‑flow water‑treatment cartridges, and high flow filter element HFU640UY010J is drop‑in substitute for original PALL 60‑inch high‑flow cartridge. Pleated gradient polypropylene media provides huge effective filtration area, low initial pressure‑drop and large dirt‑holding‑capacity. It is installed in large‑flow security filter housing, working as pre‑protection for boiler make‑up water RO system. Matched filter housing can refer to High Flow Filter Cartridge product‑series.
| Cross‑reference model | HFU640UY010J |
| Filter media | Pleated polypropylene |
| Nominal filtration rating | 10 μm |
| Length | 60 inch (1524mm) |
| Outer diameter | 165mm |
| Seal | EPDM standard, FKM optional |
| Working temperature | 5‑52℃ |
Power‑plant boiler make‑up water system requires strict control of feed‑water SDI value before reverse osmosis unit. high flow filter element HFU640UY010J is placed inside multi‑cartridge security filter housing. It intercepts suspended solids, iron oxide colloid and fine sediment from pretreatment effluent, reduces SDI index and extends RO membrane service‑life. Fewer cartridges are required under large flow condition to cut housing and spare‑parts cost. Auxiliary fluid‑treatment reference please check Industrial Oil Purification Equipment.
Strict 1:1 dimension for direct drop‑in installation without housing modification. Huge pleat area brings large dirt‑holding‑capacity and long service cycle. Polypropylene material features good chemical compatibility for neutral raw‑water. Each cartridge passes bubble‑point integrity‑test before factory‑delivery. Perfect for power‑plant EPC‑project bulk‑spare‑parts‑procurement.
Xinxiang Lifeierte Filter Corp.,Ltd produces complete series of PALL‑type high‑flow substitute cartridges, complying with industrial water‑filter test specifications. We can provide housing plus filter‑element one‑stop supply for power‑plant water‑treatment‑project. For technical‑consulting please contact our engineering team.
Q1:Can HFU640UY010J directly replace original PALL cartridge?
A1:Yes, length, outer‑diameter and sealing interface are fully matched for drop‑in replacement.
Q2:What is the main advantage of 60‑inch high‑flow filter element?
A1:Large single‑cartridge flow rate, reduces required cartridge quantity and lowers overall housing investment cost.
Q3:Is FKM seal available for special chemical‑containing water?
A3:Yes, FKM fluororubber seal can be selected for elevated‑temperature or special‑chemical‑medium.
Q4:What SDI target value can be achieved after pre‑filtration?
A4:Depends on inlet raw‑water quality, normally helps to get feed‑water SDI ≤5 for RO membrane inlet requirement.
Q5:Do you supply other precision grades for HFU640 series?
A5:We produce HFU640 series in 1μm,5μm,10μm,20μm,40μm multiple precision options.
Reference standard:HG/T 4087 Industrial water‑treatment filter housing specification
Related product:hydraulic filter assembly