40 inch Pall high flow filter element flows from inside to outside for power plant condensate filtration

Product description：

The high-flow folding filter uses deep fine polypropylene or glass fiber membrane as the filter material. It has a large diameter of 6 inches / 152mm, no central rod, one-way opening, and specially designed inside-to-outside filter direction to ensure all pollution. The particles are trapped inside the filter element. The ultra-large flow design significantly reduces the amount of filter cartridges and filter housing , greatly reducing equipment input costs and labor costs.

Product Properties

*  Great capacity of impurity and long life.
*  Less replacement saves labor cost.
*  Sealed interface reduces the danger of bypass flow and improve the efficiency of filtering.
*  Easier installment and lower labor cost
*  They are applied in various fields with their extensive chemical applications.

Technical specifications:

The material:

*  Filter material: glass fiber, polypropylene（PP）,
*  Support/Diversion layer: polypropylene（PP）
*  The end cap: reinforced polypropylene with glass fiber
*  Seal ring material: EPR (Ethylene-Propylene Rubber), silicon rubber, nitrile rubber, fluorine rubber

Performances of filter elements:

*  Filtering accuracy:1μm、5μm、6μm、10μm、20μm、40μm、70μm、100μm
*  Highest operating temperature: 82℃
*  Maximum pressure drop: 3.4bar，82℃
*  Recommended maximum filtering water flow: 1300LPM

PFTM