Highly integrating a variety of advanced water purification processes, it achieves efficient, intelligent, and stable water purification, providing one - stop solutions for various water - using scenarios.

I. Product Introduction

The integrated water purification equipment is a comprehensive water purification device that integrates multiple water treatment processes such as coagulation, sedimentation, filtration, and disinfection into a single device unit. The equipment adopts a modular design, with functional areas such as reaction zone, sedimentation zone, filtration zone, and disinfection zone integrated inside. Through scientific and reasonable water flow design and process connection, it can effectively remove pollutants in water such as suspended solids, colloids, bacteria, viruses, organic matters, and some heavy metal ions. The equipment is equipped with an automatic control system, which can monitor water quality parameters in real - time and automatically adjust the operation status. It has the characteristics of small footprint, convenient installation, low operation cost, and strong adaptability, and is widely used in rural safe drinking water projects, small urban water supply stations, industrial production water pretreatment, and emergency water supply scenarios.

II. Working Process

Raw Water Pretreatment: The raw water enters the reaction zone of the equipment through the pipeline. The coagulant (such as polyaluminum chloride, polyacrylamide, etc.) is added through the automatic dosing system, making the colloids and tiny suspended particles in the water unstable and 凝聚成较大絮体.

2. Sedimentation and Separation: The coagulated water flows into the sedimentation zone. Using the action of gravity, the flocs settle to the bottom of the tank, realizing solid - liquid separation. The sedimentation zone adopts inclined tube (plate) sedimentation technology, increasing the sedimentation area, improving the sedimentation efficiency, and reducing the content of suspended solids in the water.

3. Precision Filtration: The water after sedimentation enters the filtration zone. Through the filter media layers such as quartz sand and activated carbon, it further removes the remaining suspended solids, colloids, organic matters, and part of the odor and pigments in the water. The filtration method can be gravity filtration or pressure filtration, ensuring that the effluent turbidity reaches a low level.

4. Disinfection and Sterilization: The filtered water enters the disinfection zone. According to actual needs, disinfectants (such as sodium hypochlorite, chlorine dioxide, ultraviolet disinfection, etc.) are added to kill microorganisms such as bacteria and viruses in the water and ensure the safety of the effluent water quality.

5. Purified Water Output: The purified water after the above - mentioned treatment is transported to the water - using points through the outlet pipeline or enters the water storage facilities for standby.

6. Automatic Backwashing: When too many impurities are intercepted by the filter media layer in the filtration zone, resulting in an increase in filtration resistance (reaching the set pressure difference) or the running time reaching the set duration, the equipment automatically starts the backwashing program, using the filtered clean water to flush the filter media in the reverse direction, removing the impurities on the surface and inside of the filter media and restoring the filtration performance.

III. Product Features

Key Advantages	Description
Highly Integrated Design	Integrating multiple water treatment links such as coagulation, sedimentation, filtration, and disinfection into one device, reducing the floor area, simplifying the process flow, and reducing the construction cost.
Intelligent Automatic Operation	Equipped with a PLC control system and a variety of water quality sensors, it monitors parameters such as turbidity, residual chlorine, and pH value in real - time, and automatically adjusts the dosing amount and backwashing time, realizing unattended operation.
Efficient Purification Performance	Using advanced coagulation and sedimentation technology and high - precision filter materials, the removal rate of suspended solids and colloids exceeds 95%, and the removal rate of bacteria and viruses reaches more than 99.9%.
Flexible Customization and Adaptability	According to the raw water quality, water treatment volume (1 - 1000m³/d), and effluent standards, the equipment specifications, process combinations, and disinfection methods can be customized.
Energy - saving, Environment - friendly, and Economical	Optimized hydraulic design reduces operating energy consumption; low backwashing water consumption, and the backwashing drainage can be recycled; the service life of the equipment is up to 10 - 15 years.
Convenient Installation and Maintenance	The equipment is assembled and debugged before leaving the factory. On - site, it can be put into use only by connecting the pipeline and power supply; the modular structure design facilitates the replacement and maintenance of components.

IV. Technical Parameters

Parameter Category	Specific Parameters
Device Material	Carbon steel anti - corrosion, stainless steel 304, stainless steel 316L
Water Treatment Capacity	1 - 1000m³/d (customizable)
Inlet Water Turbidity	≤300NTU
Outlet Water Turbidity	≤1NTU
Bacteria Removal Rate	≥99.9%
Virus Removal Rate	≥99.99%
Operating Pressure	0.1 - 0.6MPa
Applicable Temperature	5 - 45℃
Dosing System	Automatic metering and dosing, capable of dosing coagulants, disinfectants, etc.
Disinfection Methods	Sodium hypochlorite dosing, chlorine dioxide generator, ultraviolet disinfection, ozone disinfection, etc. (optional)
Backwashing Methods	Water backwashing, air - water combined backwashing (optional)
Backwashing Cycle	8 - 24 hours (automatically adjustable according to water quality)
Backwashing Time	3 - 10 minutes

V. Application Fields

1. Rural Safe Drinking Water Projects: Solve the problems of poor water quality of water sources and scattered water supply facilities in rural areas, and provide safe and clean drinking water for rural residents.

2. Small Urban Water Supply Stations: As a centralized water supply device for small urban communities, schools, hospitals, and other places, it meets the daily water demand.

3. Industrial Production Water: Provide production water pretreatment for industries such as electronics, food, pharmaceuticals, and chemicals, and ensure the water quality for production processes.

4. Emergency Water Supply Scenarios: In natural disasters (such as floods, earthquakes, etc.) or sudden public events, it is used as a temporary emergency water supply device to quickly provide safe drinking water.

5. Landscape Water Body Purification: Carry out circular purification of landscape water bodies such as park lakes and artificial waterscapes, improve water transparency and water quality, and create a beautiful water environment.

6. Sewage Treatment and Reuse: Conduct in - depth purification of the preliminarily treated sewage, making the effluent meet the reuse standards for industrial circulating cooling water, municipal miscellaneous water, etc.

VI. FAQ

1. Does the integrated water purification equipment have requirements for raw water quality?The equipment has certain adaptability to raw water quality. Generally, the inlet water turbidity is required to be no more than 300NTU. If the raw water quality is poor (such as containing a large amount of oil, high - concentration heavy metals, etc.), pre - pretreatment facilities need to be added to ensure the normal operation of the equipment and the compliance of the effluent water quality.

2. Does the equipment need to be attended by a special person during operation?No. The equipment is equipped with an automatic control system, which can monitor the water quality and the operation status of the equipment in real - time, and automatically complete operations such as dosing and backwashing. Users only need to regularly check the operation parameters of the equipment and the consumption of consumables (such as filter media, disinfectants), and perform necessary maintenance and replenishment.

3. What is the service life of the equipment?Under normal use and maintenance conditions, the service life of the main structure of the equipment can reach 10 - 15 years. Among them, the replacement cycle of filter media and other consumables varies according to the raw water quality and water treatment volume. Generally, the replacement cycle of quartz sand filter media is 3 - 5 years, and the replacement cycle of activated carbon filter media is 1 - 2 years.

VII. Conclusion

With its highly integrated process design, intelligent and automatic operation mode, excellent purification performance, and wide application adaptability, the integrated water purification equipment has become an ideal choice for various water purification needs. Whether it is to improve the rural drinking water conditions, ensure the water quality for industrial production, or respond to emergency water supply, it can efficiently complete the task. Choosing our integrated water purification equipment means choosing a worry - free, efficient, and reliable water purification solution, providing a solid guarantee for your water use safety and quality.

If you are interested in this product or have any questions, please feel free to contact us at any time.

VIII. Related Products

Cartridge Filter Housings

https://www.le-filter.com/wastewater-treatment/cartridge-filter-housing/

 

Multimedia filter

https://www.le-filter.com/wastewater-treatment/multimedia-filter/