Equivalent High Flow Cartridge Filter Element Hfu640uy400h13
Descriptions of the industrial high flow pleated filter cartridge:
High Flow Pleated Filter Cartridge is single open ended which design for the direction from an inside to outside flow pattern.
The large filter area ensure the high dirt holding capacity. The low cost save the number of filter cartridge.
Long service life and superior flow rates are the main characteristics. All contaminants can be removed efficiently.
Applications of the industrial high flow pleated filter cartridge:
• Prefiltration of RO,Pretreatment of sea water desalination
• Bottled water, high Fructose,edible oil,soft drinks
• API, solvents,and water filtration in BioPharm market
• Paints and coatings,Petrochemical,Refineries
• Microelectronics
Specifications of the industrial high flow pleated filter cartridge:
• Material of Construction
• Media: Pleated glass fiber, Pleated depth PP, or Melt blown PP
• Support layer: Polypropylene
• End adaptor: Glass fiber reinforced Polypropylene
• Seal Material:Silicone,EDPM, Buna
• Micron Rating: 1um, 4.5um, 6um, 10um,20um,40um,70um,100um
• Filtration Area: 20.69 inch length is 660LPM; 40.69 inch length is 1,300LPM; 60.69 inch length is 1,900LPM.
Dimensions of the industrial high flow pleated filter cartridge:
• Outside diameter: 6" (152mm)
• Length: 20.69 inch(525mm)/ 40.69 inch(1033mm)/ 60.69 inch(1541mm)
Recommended Operating Conditions of the industrial high flow pleated filter cartridge:
Maximum Operating Temperature:
•Pleated glass fiber:121°C
•Pleated PP: 82°C
•Melt Blown PP: 65°C
•Maximum Differential Pressure: Pleated glass fiber:3.4bar at 121°C
•Pleated PP: 3.4Bar at 82°C
•Melt Blown:1.03Bar at 65°C
•Recommended Change out Differential Pressure:2.4Bar at 20°C
| Outside Diameter: | 6 inch(152mm) |
| Length: | 20 inch(528mm),40 inch(1022mm),60 inch(1538mm) |
Filter media: | Pleated glass fiber
Pleated depth Polypropylene (PP)
PP Melt blown |
| Support/Drainage: | Polypropylene (PP) |
| End caps : | Glass fiber reinforced Polypropylene |
| Seal Material : | EPDM, NBR |
| Removal Rating: | 1 µm , 4.5 µm , 6 µm , 10 µm ,20 µm ,40 µm ,70 µm,100µm |
| Maximum Operating Temperature: | Pleated glass fiber:121°C Pleated PP: 82°C Melt Blown PP: 65°C |
| Maximum Differential Pressure: | Pleated glass fiber:3.4 Bar at 121°C Pleated PP: 3.4Bar at 82°C Melt Blown:1.03Bar at 65°C |
| Recommended Change out Differential Pressure: | 2.4Bar at 20°C |
| Suggested maximum Flow of water: | 20 inch length:660LPM 40 inch length:1,300LPM 60 inch length:1,900LPM |
Other model:
HFU660UY020J,HFU660UY045H,HFU660UY045H1,HFU660UY045H13,HFU660UY045H13W,
HFU660UY045H4,HFU660UY045H4W,HFU660UY045HW,HFU660UY045J,HFU660UY060H,
HFU660UY060H1,HFU660UY060H13,HFU660UY060H13W,HFU660UY060H4,HFU660UY060H4W,
HFU660UY060HW,HFU660UY060J,HFU660UY1000H,HFU660UY1000H1,HFU660UY1000H13,
HFU660UY1000H13W,HFU660UY1000H4 ,HFU660UY1000H4W,HFU660UY1000HW,
HFU660UY1000J,HFU660UY100H,HFU660UY100H1,HFU660UY100H13,HFU660UY100H13W,
HFU660UY100H4,HFU660UY100H4W,HFU660UY100HW,HFU660UY100J,HFU660UY200H,
HFU660UY200H1,HFU660UY200H13,HFU660UY200H13W,HFU660UY200H4,HFU660UY200H4W,
HFU660UY200HW,HFU660UY200J,HFU660UY400H,HFU660UY400H1,HFU660UY400H13,
HFU660UY400H13W,HFU660UY400H4,HFU660UY400H4W,HFU660UY400HW, HFU660UY400J,
HFU660UY700H,HFU660UY700H1,HFU660UY700H13,HFU660UY700H13W,HFU660UY700H4,
HFU660UY700H4W,HFU660UY700HW,HFU660UY700J,HP1351A10ANP01,HP3202A10ANP01,
HFU620CAS010JUW HFU640CAS010JUW HFU660CAS010JUW HFU620UY020H13 HFU640UY045H13
HFU660UY400H13 HFU620GF100H13 HFU640GF200H13 HFU660GF050H13HFU620UY020J HFU640UY020J
HFU660UY020J HFU620UY045J HFU640UY045J HFU660UY045J HFU620GF100H13 HFU640GF200H13
HFU660GF100H13 HFU620UY200J HFU640UY200J HFU660UY200J HFU620UY400J HFU640UY400J
HFU660UY400J HFU620UY700J HFU640UY700J HFU660UY700J
Contact at:filtersales02@le-filter.com
{sval:sql sql='SELECT n_parameter FROM dede_addonarticle WHERE aid = ~aid~ ' } {/sval:sql}
{sval:sql sql='SELECT n_parameter FROM dede_addonarticle WHERE aid = ~aid~ ' } {/sval:sql}
