Core basic parameters of the product
This HC9601FHZ8H precision filter element is strictly produced in accordance with PALL's original precision filtration standards, with precise parameters and high adaptability, completely replacing imported products. The core parameters are as follows:
-Product model: HC9601FHZ8H (domestic substitute)
-Filtering accuracy: 3 μm, β (c) ≥ 2000, filtering efficiency 99.95%, intercepting micron level small solid impurities, colloids, and metal shavings
-Dimensions: Outer diameter 96.5mm, total height 210mm, small precision filter size, compatible with original precision filter housing
-Suitable media: precision hydraulic oil, high-purity lubricating oil, turbine oil, industrial refined mineral oil
-Maximum working pressure difference: 21MPa (210bar), suitable for high-end precision high-pressure hydraulic systems
-Temperature tolerance range: -10 ℃ to+100 ℃, with strong temperature adaptability for precision working conditions
-Suggest replacing the pressure difference: 0.35MPa. For precision systems, it is recommended to replace it in advance to ensure equipment accuracy
-Structural form: Ultra fine multi-layer folding precision filtration structure, fully wrapped in stainless steel skeleton, sealed without dead corners
Detailed introduction of product materials
-Filter material: Using imported ultra-fine resin cured fiberglass filter material, multi-layer gradient precision filtration structure, fine and uniform pores, can accurately intercept 3 μ m small impurities. The filter material undergoes dual curing and high-pressure flushing treatment, with no powder loss, detachment, or fiber overflow. The filtration accuracy is long-lasting and stable, and will not cause secondary pollution to the precision oil circuit.
-Internal and external skeleton: 304 stainless steel precision punched skeleton, with higher density and stronger support, can resist high-voltage pulse impact of precision systems, ensure precise filtration gap, and adapt to the operation needs of high-precision equipment.
-Sealing rubber ring: high-quality NBR nitrile rubber seal, anti-aging, precision hydraulic oil corrosion resistance, high sealing accuracy, no minor leakage.
-End cap structure: precision die cast metal end cap, integrated sealing molding, extremely high fitting accuracy, no gap after installation, suitable for high-end precision filtration equipment.
Main applicable scenarios and industries
HC9601FHZ8H is an ultra precision hydraulic filter element that focuses on intercepting small impurities. It is designed specifically for high-end industrial equipment that requires extremely high oil cleanliness. The core applicable scenarios are as follows:
-Power industry: precision turbine control system for power plants, precision hydraulic regulation oil circuit for generator sets
-Precision Heavy Industries: High end shield tunneling machines, precision cranes, precision control valve group filtration for large equipment
-Automation industry: high-end CNC machine tools, precision automation production line hydraulic systems
-Metallurgical industry: precision rolling mills, high-precision smelting equipment, hydraulic precision filtration systems
-High end equipment: precision energy equipment, aviation supporting industrial hydraulic auxiliary filtration system
Core advantages of source factory substitution
Xinxiang Lifeierte Filter Corp., Ltd has been focusing on the localization and replacement of high-end imported precision filter cartridges for many years. We have mature replication technology and quality control system for PALL's entire range of precision filter cartridges. Compared with ordinary manufacturers, the production advantages of high-end filter cartridges are particularly obvious:
-Precision process replication, precision benchmarking imported: Master the core ratio and folding process of imported precision filter cartridges, strictly produce according to ISO precision filtration standards, and ensure that the filtration accuracy, stability, and sealing are completely consistent with the original.
-High end materials, strict control of details: all use imported grade fiberglass filter materials and precision sealing accessories to eliminate low-priced and inferior materials, ensure the adaptation needs of high-end equipment, and eliminate the risk of small impurities pollution.
-Factory inspection with traceable accuracy: Each precision filter element undergoes separate testing for filtration accuracy, pressure difference, and sealing, with traceable data and quality to prevent products from leaving the factory with substandard accuracy.
-High cost-effectiveness and significant cost reduction: Factory direct supply without premium, with prices far lower than original imported filter cartridges, perfectly solving the pain points of expensive prices and extremely long delivery times for high-end imported filter cartridges.
FAQ
Q1: Will 3 μm high precision lead to easy clogging and short lifespan of the filter element?
A: No. The product adopts a gradient multi-layer filter material structure, with coarse filtration followed by fine filtration. It efficiently absorbs pollutants and layers, ensuring ultra-high precision while effectively extending the service life. It is suitable for precision and clean working conditions, and has a stable normal replacement cycle.
Q2: What high-precision equipment is this filter suitable for?
A: It is mainly suitable for industrial equipment with extremely high requirements for oil circuit cleanliness, such as precision control systems in power plants, high-end CNC machine tools, precision rolling mills, and precision hydraulic valve groups in shield tunneling machines. It is a specialized filter accessory for high-end precision hydraulic systems.
Q3: What is the core difference between precision filters and ordinary filters?
A: Ordinary filter cartridges can only filter large impurities and cannot intercept micron sized particles; This 3 μ m precision filter can intercept tiny gum and metal shavings, prevent micro wear of precision components, ensure the accuracy of high-end equipment operation, and adapt to high-precision and harsh working conditions.
Q4: Apart from PALL filters, what other oil filtration related products do you have?
A: Our factory has a complete line of oil filtration products, which can meet the purification needs of industrial oil products under all working conditions. In addition to the full range of PALL / HYDAC replacement oil filter elements, we also specialize in various imported and domestically renowned brand oil filter elements and filters, including the Leemin series hydraulic filter. We also sell the LYC-A, LYC-B and other series of oil filter machine, which can meet the needs of online filtration and offline fine oil filtration of equipment. In addition, we also produce customized oil coalescence dehydration filter elements to achieve integrated filtration of hydraulic oil and lubricating oil for water and impurities removal, providing one-stop solutions to industrial oil filtration problems.
Q5: What other filtering categories are included in your factory's main business?
A: Our factory is a one-stop manufacturer of industrial filtration products, with our main business covering four core filtration areas and fully adapting to industrial filtration needs. We specialize in industrial oil filtration, industrial water filtration, natural gas filtration, and industrial air filtration. We can produce customized imported replacement filters, domestic standard filters, and complete sets of filtration equipment for various categories. Our products are widely used in industries such as power, metallurgy, heavy industry, gas, and chemical, supporting batch supply, customized operating conditions, and equipment support services.
You may also be looking for
1. Hydraulic oil filter with housing
2. How to contact us
{sval:sql sql='SELECT n_parameter FROM dede_addonarticle WHERE aid = ~aid~ ' } {/sval:sql}
{sval:sql sql='SELECT n_parameter FROM dede_addonarticle WHERE aid = ~aid~ ' } {/sval:sql}
