PALL HC9600FKT16H oil filter element replacement 25 μm high flux filter cartridge for industrial hydraulic stations

Core basic parameters of the product

This HC9600FKT16H replacement filter element is produced strictly in accordance with the original design standards of the factory. All parameters comply with international industrial filtration standards and are fully compatible with the original product. The core parameters are as follows:

-Product model: HC9600FKT16H (domestic substitute)

-Filtration accuracy: 25 μ m, β (c) ≥ 2000, filtration efficiency 99.95%, efficient interception of large particle impurities, metal dust, and oil sludge impurities

-Dimensions: Outer diameter 96.5mm, total height 410mm, standard original installation size, compatible with original filter housing

-Suitable media: industrial hydraulic oil, circulating lubricating oil, mineral hydraulic media

-Maximum working pressure difference: 21MPa (210bar), suitable for conventional medium pressure hydraulic systems

-Temperature tolerance range: -10 ℃ to+100 ℃, suitable for conventional industrial room temperature and micro high temperature working conditions

-Suggest replacing the pressure difference: 0.35MPa. If the pressure difference exceeds the standard, replace it in a timely manner to ensure smooth oil flow

-Structural form: Large pleated folding filter structure, reinforced with stainless steel inner and outer skeleton, with larger oil flow capacity

Detailed introduction of product materials

Our HC9600FKT16H filter element focuses on high flux and low resistance filtration needs, with strict material selection and excellent craftsmanship. The entire set of materials is benchmarked against imported standards to ensure oil flow efficiency and filtration stability

-Filter material: Imported resin bonded fiberglass filter material is used, with a large pore gradient filtration structure, excellent breathability, extremely low oil resistance, and precise interception of large particle impurities at 25 μ m, while ensuring ultra large oil path flux.

-Internal and external skeleton: 304 stainless steel perforated skeleton, lightweight and high-strength design, effectively resists oil pressure impact while reducing oil flow resistance, prevents filter deformation and collapse, corrosion-resistant, and has a long service life.

-Sealing rubber ring: NBR nitrile rubber seal, oil resistant and anti-aging, stable sealing performance, and no gap when fitting the filter housing.

-End cap structure: Precision stamped metal end cap, integrated molding, easy installation, perfectly matched with the original filter, stable installation, strong sealing.

Main applicable scenarios and industries

HC9600FKT16H filter element is mainly used for high flux and low resistance filtration, suitable for various industrial hydraulic stations and auxiliary lubrication systems. It is mainly used for equipment pre filtration and circulating filtration. The core applicable scenarios are as follows:

-Power industry: power plant auxiliary hydraulic station, circulating lubrication system, cooling oil circuit filtration system

-Heavy Industry Machinery: Hydraulic systems for construction machinery, auxiliary filtration for large equipment, and oil circulation purification

-Metallurgical industry: auxiliary lubrication system for steel rolling equipment, hydraulic pre filtration for metallurgical machinery

-General industry: automation equipment hydraulic pump station, machine tool lubrication system, industrial circulating oil filtration

-Energy industry: Small wind power, oil and gas equipment auxiliary oil filtration system

Core advantages of source factory substitution

As a professional manufacturer of filters, our factory has been deeply involved in the filtration industry for many years, focusing on the localization and replacement of various PALL filter elements. We have a mature production and quality control system, and have obvious advantages compared to the trade and inferior products circulating in the market

-Mature technology, performance benchmarking against original equipment: strictly produced according to the original factory parameters and international filtration standards, the filter material ratio, folding process, and structural strength are fully replicated from imported products, with no difference in usage effect.

-Factory direct supply, high cost-effectiveness: eliminating the need for intermediaries to increase prices layer by layer, the factory price is directly supplied to customers, and the price is only 1/5 of the original import price, significantly reducing the operation and maintenance costs of enterprises.

-Strict quality control and stable quality: Each batch of products undergoes differential pressure testing, sealing testing, and filtration accuracy testing, with strict quality control standards to prevent defective products from leaving the factory.

FAQ

Q1: Can the filter element of HC9600FKT16H replace the original Pall filter element?

A: It can be perfectly replaced. The product size, interface, filtration accuracy, and pressure performance are completely consistent with the original, and the process and material are benchmarked against imported standards. It can be directly replaced in situ and is compatible with all original supporting equipment.

Q2: What working conditions are suitable for 25 μm accuracy and is the filtering effect sufficient?

A: 25 μm is a universal precision for industrial hydraulic pre filtration and circulation filtration, suitable for removing large particle impurities and sludge in the oil circuit, balancing high flux and filtration effect, fully adapting to the working conditions of conventional industrial hydraulic stations and lubrication systems.

Q3: What is the oil flow rate of this filter element and will it cause blockage in the oil circuit?

A: The product adopts a large pleated distance and high flux structure, with extremely low filtration resistance and a much higher oil flow rate than ordinary filter elements. Under normal working conditions, it will not cause oil blockage or pressure loss, ensuring stable operation of the equipment.

Q4: Apart from PALL filters, what other oil filtration related products do you have?

A: Our factory has a complete line of oil filtration products, which can meet the purification needs of industrial oil products under all working conditions. In addition to the full range of PALL / HYDAC replacement oil filter elements, we also specialize in various imported and domestically renowned brand oil filter elements and filters, including the Leemin series hydraulic filter. We also sell the LYC-A, LYC-B and other series of movable oil filters, which can meet the needs of online filtration and offline fine oil filtration of equipment. In addition, we also produce customized oil coalescence dehydration filter elements to achieve integrated filtration of hydraulic oil and lubricating oil for water and impurities removal, providing one-stop solutions to industrial oil filtration problems.

Q5: What other filtering categories are included in your factory's main business?

A: Our factory is a one-stop manufacturer of industrial filtration products, with our main business covering four core filtration areas and fully adapting to industrial filtration needs. We specialize in industrial oil filtration, industrial water filtration, natural gas filtration, and industrial air filtration. We can produce customized imported replacement filters, domestic standard filters, and complete sets of filtration equipment for various categories. Our products are widely used in industries such as power, metallurgy, heavy industry, gas, and chemical, supporting batch supply, customized operating conditions, and equipment support services.

You may also be looking for

1. HYDAC filter element

2. How to contact us