Product Overview
Interchangeable Hydraulic Filter Elements are stocked by maintenance departments that run mixed fleets, and the HYDAC 0330R020BN4HC is a standard 20 μm return-line element for mining and heavy mobile equipment. The designation combines a 0330 element size, a 020 micron grade and BN4HC media specification, which is the high dirt-holding grade used where return flow carries a heavy particle load. Our element reproduces that geometry and media class, so it drops into the existing return-line housing without adapters, and the evaluation is made on measured efficiency rather than on the fact that it fits.
Basic Technical Parameters
| Cross-reference | HYDAC 0330R020BN4HC |
| Element size | 0330R |
| Micron rating | 20 μm (per original designation) |
| Media | BN4HC grade high dirt-holding fiberglass |
| Seal material | NBR standard; FKM on request |
| Working medium | Mineral hydraulic oil; biodegradable and glycol fluids with matching seals |
| Application | Return line filtration on mobile and mining hydraulic systems |
Mining Equipment Application Scenario
Underground loaders, drills and haul trucks return oil to tank through lines that pass close to working faces, so the return flow carries rock dust, hose fragments and metal particles from bucket and boom joints. The 20 micron return line filter is the last barrier before that oil re-enters the reservoir and is drawn back to the pump. Equipment operators typically change the element at the same service interval as the hydraulic oil, and the visual check for pleat damage is as important as the differential pressure reading, because a torn pleat on a return element quietly passes coarse debris straight to the tank. Because the element matches the original 0330R interface, it is swapped with the same procedure and the same torque on the cover bolts.
Product Advantages
BN4HC grade media carries a higher dirt load per unit area than a standard grade of the same micron rating, which is exactly what a return-line position needs: large amounts of moderately coarse contaminant, without an early pressure rise. The pleat pack is supported on a perforated core so that flow surges during cold start do not deform the media. Bonded end caps and a controlled seal groove rule out internal bypass, and the cage resists handling damage in a workshop where elements are stored in open crates. Each element is fabrication-integrity checked, and the 20 μm rating is held to the original designation rather than being quietly relaxed.
Manufacturer & Factory Strength
Our HYDAC replacement element range covers the common R and MA element sizes, and each shipment carries test evidence to ISO 2942 and ISO 16889. Mining customers typically order in fleet quantities with a rolling schedule, and we hold the element geometry constant between batches so that a stock item ordered in January fits a housing serviced in December. Where the site also needs to clean bulk oil before filling, a hydraulic oil filter machine from the same product family is the usual addition.
FAQ
Q1: Does the 020 in the part number mean 20 micron?
A1: Yes, the designation carries the micron grade; this element is the 20 μm version of the 0330R family. Confirm against the OEM list for other grades.
Q2: Can a return-line element be used in a pressure-line housing?
A2: No. Return elements are not built for high collapse differential; substituting one in a pressure position risks media failure.
Q3: What is the advantage of BN4HC media over a standard grade?
A3: Higher dirt-holding capacity at the same micron rating, which lengthens the service interval in high-contamination return lines.
Q4: Why check the pleats visually at every change?
A4: A damaged pleat passes coarse debris directly to the reservoir without any differential pressure signal, so visual inspection is the only reliable check.
Q5: Are other 0330R micron grades available?
A5: Yes, several micron grades exist in the 0330R family; specify the OEM part number and we will confirm the cross-reference.
Related Products: duplex return line filter | contact our engineering team
Reference: ISO 16889 Hydraulic fluid power — Multi-pass method for evaluating filter element performance
{sval:sql sql='SELECT n_parameter FROM dede_addonarticle WHERE aid = ~aid~ ' } {/sval:sql}
{sval:sql sql='SELECT n_parameter FROM dede_addonarticle WHERE aid = ~aid~ ' } {/sval:sql}
