V3.0520-16 Replacement for ARGO filter element

V3.0520-16 Replacement for ARGO filter element

 

V3.0520-16 Replacement for ARGO filter element

1. V3.0520-16 Product Description 

Filter material???filter element adopts many kinds of materials, such as glass fiber, wood pulp filterpaper , stainless steel sinter fiber web and stainless steel wire woven.

Nominal filtration rating: 0.01μ ~ 1000μ

Operating pressure???1bar-210bar (Hydraulic Liquid Filtration)

O-ring material: Vition, NBR

The critical fact for the proper operation of the engine is to keep the lubricating oil clean, or to ensure no corrosive impurity inside the lubrication oil.

The media that we offer in the ARGO V3.0520-16 is offered in both standard Microglass and Microglass with water removal.

Hydrafil's Mobile Filtration Unit

New oil is often considered clean oil. However, during the production process, and transport, new oil will collect high levels of water and contamination. During this process, it is not uncommon for the ISO code of new oil to fall to 24/22/19, while the desired ISO code is 16/14/11.

Our Mobile Filter Cart efficiently and effectively removes any accumulated water and particulate. This process is critical to preserving lube and hydraulic systems due to the fact that free and dissolved water will lead to accelerated abrasion, the corrosion of metal surfaces, increased electrical conductivity, viscosity variance, loss of lubricity and bearing fatigue. Our filter elements with water removal capabilities will capture and retain up to 23 ounces of water.

Additionally, the Mobile Filter Cart will condition fluids that are already in service. The hose ends and reservoirs can be equipped with “quick connect” fittings that allow for the cart to be used as a portable side loop system.

?      Filter new fluids during transfer and replenishment

?      Remove and retain free and dissolved water

?      Flush and condition systems already in service

V3.0520-16 Filter Seal

Have you ever had to cold-start your equipment? If yes, then a Buna O-ring is an excellent choice for your hydraulic filter. Buna O-rings provide superior resistance to tear and abrasion during those cold-flow applications and they are the perfect ring when you decide to marry that cold-flow with petroleum products..

V3.0520-16 Buna O-rings are recommenced for:

?      General purpose sealing

?      Petroleum oils and fluids

?      Cold Water

?      Silicone greases and oils

?      Di-ester base lubricants (MIL-L-7808)

?      Ethylene glycol base fluids (Hydrolubes)

?      Operating temperature -45°f to 225°f

V3.0520-16 Word on Quality

At Hydrafil we insist on providing our customers with the highest quality of filtration products. As a result, all of our replacement elements are manufactured right here in the United States, under the most rigorous quality standards. Additionally, all of our filter elements carry six ISO Standards and we fully guarantee all of our products.

ISO 2941       Collapse & Burst ResistantISO 2942     Fabrication & Integrity Test

ISO 2943       Material Compatibility with Fluids

ISO 3724       Flow Fatigue Characteristics

ISO 3968       Pressure Drop vs. Flow Rate

ISO 16889      Multi-pass Performance Testing

4.Model of V3.0520-16