ARGO V3052013 Replacement High Pressure Hydraulic Filter Cartridge High Precision Hydraulic System Precision Filtration

Detailed explanation of material and process

V3052013 oil return filter element adopts foldable composite fiberglass filter material, which increases the filtration area and enhances the pollutant holding capacity. The return oil of the hydraulic system will collect wear and impurities from various places, and the total amount of pollutants is large, so the return oil filter element has high requirements for the pollutant holding capacity. The filter material is cured with resin and resistant to oil erosion. The filter layer is equipped with metal support nets inside and outside to resist the impact of fluctuations in return oil flow and prevent damage to the filter layer.

The end cover adopts stamped steel plate, hot melt bonding technology, and the sealing rubber ring is pre installed as a whole, making it easy to disassemble and assemble on site. There are flow fluctuations and oil impact in the oil return condition. We strengthen the adhesion strength of the filter layer and end cap during production to avoid frequent pressure fluctuations causing delamination. Standard nitrile rubber sealing ring, compatible with mineral hydraulic oil; Customers can replace the fluororubber seal with synthetic hydraulic oil.

Product basic parameters

-Model: V3052013 (domestic substitute)

-Benchmarking brand: ARGO

-Applicable medium: anti-wear hydraulic oil

-Filter material: Foldable composite fiberglass, inner and outer metal support mesh

-Sealing element: NBR nitrile rubber

-Filtering accuracy: 10 μm

-Work pressure: ≤ 1.6MPa

-Working temperature: -25~+100 ℃

-Installation position: Hydraulic oil tank return filter

Applicable working conditions and industries

The return oil filter element is installed on the return oil side of the fuel tank, which belongs to low-pressure and high flow conditions.

Applicable equipment:

1. Hydraulic oil tanks for construction machinery such as excavators, loaders, and concrete pump trucks;

2. Mining excavation equipment and underground hydraulic trolleys;

3. Mobile hydraulic pump station, vehicle mounted hydraulic system;

4. Hydraulic return circuit for small and medium-sized injection molding machines and die-casting machines;

5. Hydraulic system of port lifting machinery.

Core advantages of the product

1. Large capacity for dirt collection, suitable for collecting a large amount of impurities in the return oil pipeline, extending the filter replacement cycle.

2. 1:1 replica of the original size, directly replacing ARGO V3052013, with simple maintenance and replacement.

3. Fiberglass filter material intercepts oil sludge and metal particles, maintains the cleanliness of the oil tank, and protects the suction port of the main pump.

4. The structure is resistant to flow impact and can cope with flow fluctuations caused by the start and stop of construction machinery. The filter layer is not easily damaged.

5. Spot supply and domestic substitution significantly reduce the procurement cost of maintenance parts for construction machinery.

6. Filter material accuracy and sealing material can be customized as needed, supporting sample customization and development.

Factory substitution production advantages

Our factory has been supporting the engineering machinery maintenance market for many years, and the V series ARGO oil return filter element is a mature alternative model. The production process strictly controls the folding layers and adhesive strength of the filter material, and optimizes quality control specifically for the frequent start stop and flow fluctuation of mobile devices. Each batch of products undergoes integrity testing to prevent defective products from leaving the factory. Support domestic maintenance dealers and foreign trade export orders, and provide product qualification certificates and factory inspection reports. The technical team can assist customers in selecting and distinguishing between pressure pipeline filter elements and return oil filter elements to avoid selection errors.

FAQ

Q1: How long does it usually take to replace this oil return filter element in construction machinery?

A: It is recommended to replace the construction site in 2000 hours for severe dust conditions; Indoor stable working conditions can be extended to 3000 hours, with priority given to the differential pressure indication of the filter.

Q2: Can we make a stainless steel end cap version?

A: Stainless steel end caps can be customized for use in humid and corrosive environments, and the customization cycle needs to be communicated in advance.

Q3: Can the differential pressure alarm continue to run for a short period of time?

A: If the pressure difference reaches the limit value, it means that the filter element has been severely clogged. It is recommended to shut down and replace it as soon as possible; Continuing to use may cause the filter layer to break down, and a large amount of impurities may directly enter the fuel tank and damage the oil pump.

Q4: Apart from ARGO filter elements, what other oil filtration products do you have?

A: Our factory has a complete line of oil filtration products, which can meet the purification needs of industrial oil products under all working conditions. In addition to the full range of ARGO replacement oil filters, we also specialize in PALL, HYDAC, Leemin and other full range oil filters and filters, matched with LYC-A series movable oil filters and oil coalescence dehydration filters, providing one-stop solutions for industrial oil impurity removal and water filtration problems.

Q5: What other filtering categories are included in the factory's main business?

A: Our factory is a one-stop industrial filtration source manufacturer, with main business covering four core areas: industrial oil filtration, industrial water filtration, natural gas filtration, and industrial air filtration. We can customize various imported substitute filter elements, domestic standard filter elements, and complete sets of filtration equipment, suitable for multiple industry scenarios such as power, metallurgy, chemical, gas, and shipbuilding.

You may also be looking for

1. Oil filter machine

2. Coalescer&separator element