Oil Purification products
Air Compressor Filter
Air Compressor Inline Filter
Water purification equipment
Air Purification Products
Brand Name:
Model Number:
Nominal filtration rating:
Application:
Operating pressure:
Working temperature:
Replacement or not:Replacement
The CDHR series belongs to the industrial air filtration system range and is built as a negative pressure, horizontal-cartridge platform. Air enters the inlet, passes the cylinder from outside the filter media inward, then reaches the clean chamber and leaves through the outlet. When dust accumulates on the media surface, resistance rises; the pulse valve opens and compressed air is injected into the cartridge center, removing the dust in sequence. CDHR 2 12 carries 12 cartridges, 276 m² of filter area, 6 valves and a maximum equipment resistance of 1500 Pa.
| Model | CDHR 2 12 |
| Cartridge numbers | 12 |
| Filter area | 276 m² (cellulose media basis) |
| Pulse valve numbers | 6 |
| Operating pressure | Negative pressure |
| Max equipment resistance | ≤1500 Pa |
| Cleaning method | Sequential pulse jet |
| Container loading | 3 units in 20GP, 7 units in 40GP |
A fabrication shop running six robot welding cells produces submicron fume that settles on nearby equipment and enters the breathing zone. The horizontal cartridge layout lets ducting run at low height across the shop bay, and 12 cartridges hold the fume load of a full shift before pulse cleaning. Collected dust drops into the hopper and is discharged through the bottom valve, which keeps the working floor clean without manual sweeping. Where the shop also runs a larger baghouse dust collector on the shot-blast line, the CDHR unit handles the welding side and keeps the two dust streams separate.
Modular construction allows the unit to be split for container shipment and assembled on site without welding. High dust removal efficiency covers fine fume, and the horizontal cartridge arrangement gives a small footprint with easy cartridge access from the front door. Low resistance loss keeps fan power modest at the 1500 Pa limit. Where the process needs a final polish stage, discharge air can pass a medium efficiency air filter bank before returning to the workshop.
Xinxiang Lifeierte Filter Corp., Ltd (Stock Code 837936) has delivered more than 300 dust collection installations across steel, woodworking, chemical, food and cement sectors. Cartridge dust collectors are assembled and leak-checked before dispatch, and the same engineering team supports the Oil Filtration Machine and liquid product lines, so a plant can source air and fluid filtration from one supplier. For airflow and duct layout review, contact our engineering team.
Q1: What does the first digit in CDHR 2 12 mean?
A1: The leading digit denotes the cartridge diameter family; 2 series uses the standard 324 mm cartridge, and 12 is the cartridge count.
Q2: Why is the collector operated under negative pressure?
A2: Negative pressure keeps dust inside the casing and prevents leakage at doors and flanges, which protects the workshop environment.
Q3: How is dust removed from the cartridges?
A3: A pulse controller fires the 6 valves in sequence, injecting compressed air into each cartridge center to blow the cake off the outer surface.
Q4: What filter area figure should be used for sizing?
A4: The 276 m² figure is based on cellulose media; for polyester or PTFE media the area differs, so confirm with the supplier before sizing.
Q5: Can the unit be shipped in one container?
A5: Yes, modular panels ship separately; 3 units fit a 20GP and 7 units a 40GP container according to the catalogue loading table.
Reference: GB/T 6719 baghouse and cartridge dust collector technical conditions | air cleaning
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()