P.3-362 Fuel Water Separator Coalescer – High Flow, Low Pressure Drop

Product Introduction:

The P-Type Coalescer Element is a high-performance filtration solution designed for the removal of free water and fine solids from aviation fuel and other hydrocarbons. Certified to EI 1581 6th Edition, Category C, this coalescer is ideal for use in filter/water separators across mobile and stationary refuelling equipment, hydrant dispensers, fuel depots, refineries, and barges.

Key Features:

• Flow Direction: In-to-out

• Change-out Differential Pressure: 1.0 bar (15 psi)

• Max Pressure Differential Rating: 5.2 bar (75 psi)

• Service Life: Up to 36 months

• Storage Life: Up to 60 months

• Operating Temperature: -30°C to +80°C

• Outer Diameter: 152 mm (6 inches)

• Center Tube: Epoxy coated steel

• Gaskets: NBR (Buna-N)

• End Caps: Polyamide with reinforced glass fibre or epoxy coated steel

Available Models: P.1, P.3, P.4, P.7 series with various lengths from 279 mm to 1422 mm.

Specification

End Cap Type	Model Code	Nominal Length (mm)	Nominal Length (inch)
P.1 (Flat Sealed, Special)	P.1-842	842	33
P.3 (Flat Sealed, Open End)	P.3-279	279	11
	P.3-362	362	14
	P.3-467	467	18
	P.3-559	559	22
	P.3-727	727	29
	P.3-842	842	33
	P.3-965	965	38
	P.3-1093	1093	43
	P.3-1422	1422	56
P.4 (Screw / Threaded Base)	P.4-279	279	11
	P.4-362	362	14
	P.4-467	467	18
	P.4-559	559	22
	P.4-727	727	29
	P.4-842	842	33
	P.4-965	965	38
	P.4-1093	1093	43
	P.4-1422	1422	56
P.7 (Flat Sealed, Alternative Design)	P.7-362	362	14
	P.7-559	559	22
	P.7-727	727	29
	P.7-842	842	33
	P.7-965	965	38
	P.7-1093	1093	43
	P.7-1422	1422	56

Applications:

• Mobile & stationary refuelling equipment

• Hydrant dispensers

• Tank farms & loading terminals

• Refineries & barges