Product Introduction
Utilizes new nano - scale composite fiber materials, with excellent demulsification and coalescence capabilities for severely emulsified oil - water mixtures.
The unique gradient filtration structure, from coarse to fine filtration, can precisely intercept particulate impurities and tiny droplets ranging from 0.1μm to 10μm.
The modular design is compatible with various filtering devices, widely used in oil product purification processes of industries such as petroleum, electricity, and machinery manufacturing.
Medium Inflow: Oil products containing moisture and impurities enter from the outside of the filter element, and the outer loose structure first intercepts large - particle impurities.
Coalescence Process: The oil continues to penetrate inward. In the coalescence layer, tiny droplets are adsorbed and collide on the surface of special fibers, gradually coalescing into larger droplets.
Separation and Settlement: The coalesced large droplets sink to the separation layer due to gravity, separating from the oil product, and the clean oil flows out from the center of the filter element.
Saturation Warning: When the filter element reaches a certain degree of dirt holding, the pressure difference monitored by the device will reach the preset threshold, indicating that the filter element needs to be replaced.
Efficient Demulsification: Compared with traditional filter elements, the demulsification speed is increased by 50%, and it can quickly handle highly emulsified oil - water mixtures.
Large Dirt - holding Capacity: The special fiber structure results in a high internal porosity of the filter element, increasing the dirt - holding capacity by 30% and extending the service life.
High Temperature and Pressure Resistance: It can operate stably under a pressure of 1.6MPa and a high temperature of 80℃, adapting to harsh working conditions.
Easy Installation: The standardized interface design allows for quick replacement of the original filter element, reducing equipment downtime.
| Item | Parameter Range |
|---|
| Filtration Precision | 0.1 - 10μm |
| Working Pressure | ≤1.6MPa |
| Working Temperature | -10℃ - 80℃ |
| Applicable Media | Lubricating oil, hydraulic oil, diesel oil, etc. |
| Filter Element Material | Nano - composite fiber, polypropylene |
Petroleum Extraction: Conducts preliminary dehydration and impurity removal of the extracted crude oil to improve the quality of crude oil.
Electric Power Generation: Used for the purification of turbine lubricating oil and transformer oil to ensure the normal operation of equipment.
Machining: Conducts cyclic filtration of the hydraulic oil used in processing equipment to extend the service life of the oil.
Transportation: Fine filtration of marine fuel oil and aviation kerosene to ensure the stable operation of engines.
Question 1: What factors affect the service life of the coalescing filter element?
Answer: The service life of the coalescing filter element is mainly affected by factors such as the degree of oil product contamination, frequency of use, working pressure, and temperature. If there are many impurities in the oil product, long - term use, or the working pressure and temperature exceed the rated range, it will shorten the service life of the filter element.
Question 2: How to determine if the coalescing filter element has failed?
Answer: When the following situations occur, the filter element can be judged to have failed: First, the water content of the filtered oil product significantly increases and exceeds the specified standard; second, the pressure difference during equipment operation remains continuously higher than the set value, and it cannot be reduced even after flushing; third, the filter element has physical damage such as breakage and deformation.
The super - strong coalescing filter element has become an innovative product in the field of oil product purification with its efficient demulsification ability and precise filtration performance. Its excellent performance can effectively protect equipment, reduce maintenance costs, and provide reliable solutions for oil product treatment in various industries.
Equivalent P-all Filters
Replacement HYDAC filter element
{sval:sql sql='SELECT n_parameter FROM dede_addonarticle WHERE aid = ~aid~ ' } {/sval:sql}
{sval:sql sql='SELECT n_parameter FROM dede_addonarticle WHERE aid = ~aid~ ' } {/sval:sql}
