Position: HOME > Product > Water purification equipment > Water Filter Element >
Equivalent SFP-2660 ultrafiltration (UF) modules UF membrane
  • Equivalent SFP-2660 ultrafiltration (UF) modules UF membrane

Equivalent SFP-2660 ultrafiltration (UF) modules UF membrane

Read 2 Reviews23 Q&As Write a Review
Introduction:TheLEFILTERultrafiltration(UF)modulesaremadefromhighstrength,hollowfibermembranesthatha

PARAMETER

Brand Name: LEFILTER
Model Number: LF-SFP2660
Nominal filtration rating:
Application:
Operating pressure:
Working temperature:
Replacement or not:Replacement

Introduction:

The LEFILTER ultrafiltration (UF) modules are made from high strength, hollow fiber membranes that have excellent features and benefits:

• 0.03 µm nominal pore diameter for removal of bacteria, viruses, and particulates including colloids to protect downstream processes, such as RO

• PVDF polymeric hollow fibers for high strength and chemical resistance allows longer membrane life

• Hydrophilic PVDF fibers for easy cleaning and wettability that help maintain long term performance

• Outside In flow configuration for high tolerance to feed solids that helps reduce the need for pretreatment processes

• U-PVC housing, helping to eliminate the need for costly pressure vessels

This module is an ideal choice for systems capacities of 50 m3/hr (220 gpm) or less. The shorter, 60 inch length module offers higher efficiencies over a wider range of feed water conditions compared to longer length modules. The smaller, 6 inch diameter module allows a more compact design for space constrained installations.

LEFILTER Ultrafiltration Modules can be used for a wide variety of treatment applications such as surface water, seawater, industrial wastewaters, and secondary effluent wastewater.


Typical Properties:

Original Model: SFP-2660

Vendor's P/N: LF-SFP2660

Type: pretreatment

Membrane area: 33 m2 (355 ft2)

Module volume: 16 liters (4.2 gallons)

Weight (empty): 25 kg (41 lbs)

Weight (water filled): 55 kg (90 lbs)


Dimensions:

L: 1863 mm

L1: 1500 mm

L2: 1610 mm

L3: 1710 mm

D: 165 mm

W1: 125 mm

W2: 250 mm


Drawing:

Drawing


Suggested operating conditions:

Filtrate Flux @ 25ºC: 40 – 90 L/(m2h)

Flow Range Per Module: 1.3 – 3.0 m3/h

Temperature: 1 – 40ºC

Max. Inlet Module Pressure (@ 20ºC): 6.25 bar

Max. Inlet Module Pressure (@ 40ºC): 4.75 bar

Max. Operating TMP: 2.1 bar

Max Operating Air Scour Flow: 12 m3/h

Max Backwash Pressure: 2.5 bar

Operating pH: 2 - 11

NaOCl (max.): 2,000 mg/L

Particle Size (max.): 300 µm

Flow Configuration: Outside in, dead end flow

Expected Filtrate Turbidity: ≤0.1 NTU

Expected Filtrate SDI: ≤2.5



{sval:sql sql='SELECT n_parameter FROM dede_addonarticle WHERE aid = ~aid~ ' } {/sval:sql}
{sval:sql sql='SELECT n_parameter FROM dede_addonarticle WHERE aid = ~aid~ ' } {/sval:sql}