Oil Purification products
Air Compressor Filter
Air Compressor Inline Filter
Water purification equipment
Air Purification Products
Brand Name: None
Model Number: LF‑MW‑30‑5
Nominal filtration rating:5 μm
Application:Fine chemical high temperature process liquid circulation filtration, high temperature oil phase filtration
Operating pressure:
Working temperature: ≤300℃
Replacement or not:Replacement
Water Filter Element includes reusable metal‑sintered filter‑cartridge series for high‑temperature chemical‑liquid‑treatment, and metal sintered mesh filter cartridge LF‑MW‑30‑5 is 30‑inch multi‑layer 316L stainless‑steel sintered‑mesh filter‑element. Multi‑layer gradient sintered‑mesh‑structure withstands high‑temperature and corrosive process‑liquid, and can be regenerated by ultrasonic‑cleaning or back‑flush. Fits 30‑inch metal‑filter‑housing for fine‑chemical hot‑liquid circulating‑filtration. Matched filter‑housing belongs to High Flow Filter Cartridge product‑range.
| Model | LF‑MW‑30‑5 |
| Filter media | Multi‑layer 316L stainless‑steel sintered mesh |
| Nominal filtration rating | 5 μm |
| Length | 30 inch (762mm) |
| Outer diameter | 62mm |
| Seal | Metal‑graphite / PTFE optional |
| Max working temperature | 300℃ |
Many fine‑chemical synthesis‑process produce high‑temperature circulating‑liquid mixed with tiny solid catalyst‑particles and metal‑wear‑debris. Ordinary polymer filter‑cartridge cannot bear high‑temperature‑condition. metal sintered mesh filter cartridge LF‑MW‑30‑5 installs inside metal security‑filter housing. Multi‑layer sintered‑mesh intercepts solid‑particle contaminant in hot process‑liquid; cartridge can be repeatedly regenerated by back‑flush or ultrasonic‑cleaning to reduce long‑term consumable‑cost. It is also suitable for high‑temperature oil‑phase circulating‑filtration. For high‑temp‑liquid‑filtration‑equipment‑reference please check Industrial Oil Purification Equipment.
316L multi‑layer gradient sintered‑mesh material withstands high‑temperature and weak‑corrosive media. All layers are sintered into an integrated structure, no delamination or fiber shedding under frequent backwash cycles. The uniform 5μm pore rating delivers stable particle retention performance. Unlike disposable PP or PES filter cartridges, this metal sintered mesh filter cartridge can be cleaned and reused many times, greatly cutting running cost for continuous chemical production lines. We can customize outer diameter, length and sealing structure according to customers’ existing filter housing. All finished elements will pass pressure and bubble point test before shipment.
Q1: What cleaning method is recommended for LF‑MW‑30‑5 sintered mesh cartridge?
A1: Ultrasonic cleaning with suitable solvent or online back flushing is preferred. Strong acid soaking is not suggested.
Q2: Can this sintered mesh element work for hot oil filtration?
A2: Yes, it is compatible with high temperature hydraulic oil and thermal oil, as long as temperature stays below 300℃.
Q3: Is custom size available?
A3: We support custom length, OD and sealing type for special filter vessel requirements.
Q4: What is the difference between sintered mesh and sintered powder filter?
A4: Sintered mesh has better backwash performance and higher dirt holding capacity; sintered powder usually gets finer precision.
Q5: Do you supply the matched stainless steel filter housing?
A5: Yes, we can provide complete filter housing together with Water Filter Element for one-stop supply.