TAISEI KOGYO PSH48C Alternative Hydraulic Filter Industrial High Flow Lubrication System

Core technical parameters of the product

This filter element product strictly follows the original technical specifications of the PSH series, and has undergone high flow cycle testing, pressure resistance testing, and life simulation testing before leaving the factory. The core parameters are as follows:

-Product model: PSH48C (domestic substitute)

-Filter material type: multi-layer gradient long-lasting fiberglass filter material

-Adaptive filter: TAISEI KOGYO PSH48 series high flow lubrication filter

-Model definition: PSH=High flow lubrication long-term series; 48=Large specification and high flow size; C=Standard sealing structure

-Applicable media: turbine oil, large gear lubricating oil, industrial long-lasting lubricating media

-Maximum working pressure: 1.6MPa

-Maximum collapse pressure difference: 12bar

-Working temperature range: -20 ℃ to+105 ℃

-Suggest changing the pressure difference: 0.15MPa

-Oil flow direction: external inlet and internal outlet, original factory standard flow direction

-Structural configuration: Large area high-efficiency fiberglass filter layer, overall reinforced support skeleton, long-term oil resistant sealing system

Advantages of product material structure

PSH48C focuses on high flow, long service life, and continuous operation, with a comprehensive material structure that is suitable for harsh working conditions of large lubrication systems:

1. Long term gradient glass fiber filter material: using industrial grade long-lasting cured glass fiber, multi-layer gradient folding design, with a large filtration area and super strong pollutant holding capacity, it can continuously intercept oil sludge, fine abrasive particles, and gum impurities for a long time, with a gentle increase in pressure difference and a service life far exceeding that of conventional filter elements. It is suitable for 24-hour uninterrupted circulation filtration.

2. Overall reinforcement support structure: The integrated thickened support skeleton has strong structural stability and is not easily deformed or collapsed under high flow impact. It can withstand long-term cyclic pressure fluctuations and eliminate the problem of structural failure during long-term operation.

3. Long term oil resistant sealing system: Using aging resistant high-quality sealing components, it is not easy to swell, harden, or fail when immersed in turbine oil and gear oil for a long time. It is suitable for long-term continuous operation conditions and reduces sealing leakage failures.

4. High strength composite bonding process: The end cap, filter material, and skeleton are formed by hot pressing composite molding, with high bonding strength and long-term high flow scouring without delamination or cracking, ensuring the long-term stability of equipment operation.

Applicable industries and working conditions scenarios

This model is exclusively designed for large lubrication systems with high flow circulation filtration, and is not suitable for small hydraulic precision circuits

-Power industry: Long term circulating filtration for power plant turbine oil stations, fan/pump large oil stations.

-Heavy industry cement industry: purification of lubricating oil for large roller presses and vertical grinding equipment gearboxes.

-Mining and metallurgical industry: large mining equipment, rolling mill auxiliary equipment, large lubrication station oil circulation filtration.

-Continuous production equipment: industrial complete lubrication system with 24-hour uninterrupted operation for long-term purification.

Core advantages of the product

1. Super large sewage capacity and long service life: With a gradient structure with a large filtration area, the sewage capacity far exceeds that of conventional filter elements, greatly extending the replacement cycle, adapting to continuous production conditions, and reducing downtime losses.

2. High flow rate and low flow resistance, suitable for system operating conditions: excellent flow performance, minimal pressure loss under high flow circulation, no increase in oil pump load, energy-saving and efficient.

3. Long term aging resistance, suitable for long-term operation: The filter material, seal, and structure are designed according to long-term working conditions, resistant to high temperature, oil aging, and continuous erosion, with stable operation and low failure rate.

4. Targeted purification of lubricating oil: specially adapted for turbine oil and gear oil, efficiently adsorbs oil sludge and gum, delays oil aging and deterioration, and extends the service life of lubricating oil.

Factory quality control and service advantages

Our factory has established a special long-term performance testing system for PSH large flow long-term filter element, simulated the industrial continuous operation condition to test the filter element life, pressure stability, anti-aging performance, and strictly control the quality of each batch of products. Ready stock, supporting single sample, annual maintenance bulk procurement, engineering project bidding, providing a full set of quality inspection qualifications and testing reports, supporting sealing material, structural customization, and foreign trade OEM, fully adapting to the maintenance and supporting needs of large industrial equipment.

Frequently Asked Questions (FAQ)

Q1: Can this filter operate continuously for 24 hours without interruption?

A: Fully compatible, designed for continuous operation of large equipment, structurally stable, aging resistant, and capable of long-term uninterrupted cyclic filtration.

Q2: Is the slow increase in pressure difference due to the failure of the filter element?

A: No, it belongs to the product advantage. This model has a huge capacity for dirt collection, and the pressure difference rises steadily, indicating that the filter element is in good working condition for a long time. It can be replaced after reaching the standard pressure difference.

Q3: How to pair a large lubrication system with a filter element for optimal performance?

A: The front end is equipped with a metal mesh coarse filter to intercept large particles, and the back end uses PSH48C long-lasting fine filter, combined with regular oil sample testing, which can stabilize the cleanliness of the oil for a long time and maximize the service life of the equipment.

Q4: Apart from TAISEI KOGYO filter elements, what other oil filtration products do you have?

A: Our factory has a complete product line for oil filtration. In addition to TAISEI KOGYO replacement filters, we also produce PALL, HYDAC, and Leemin series hydraulic filters, which are matched with mobile oil filter machine and coalescence dehydration filters to achieve integrated filtration of oil impurities and water.

Q5: What other filtering categories does the factory produce?

A: The source manufacturer covers industrial oil filtration, industrial water filtration, natural gas filtration, air filtration, and can produce imported replacement filters, domestic standard filters, and complete sets of filtration equipment. It supplies to multiple industries such as power, metallurgy, chemical, and gas.

You may also be looking for

1. PALL filter element

2. HYDAC filter element