HNP series oil purifier is designed to filtering oil by remove water,air and dirty. Oil oxidation
,Lubrication performance loss and aeration influence directly on reliability of system and service
life of system component and oil.
The P-all HNP fluid conditioning purifier removes 100% of free water and as much as 80% of dissolved
water. It also removes 100% of free and entrained gases and up to 80% of dissolved gases. Particulate
removal is achieved using a high beta rated (ß5(c)=1000) Ultipor® III filter element to polish the fluid before
discharge back to the system reservoir.Other replacement filter media grades are also available to suit
application requirements.
The HNP can be moved from one system to another or left as a permanent installation.
The HNP purifier is simply connected to an electric supply, the inlet valve opened and “reset” and “start” buttons
pressed to start the fluid purifying process.Automatic controls, integral to the unit, constantly monitor the operation
and will safely shut down the system if fluid levels and pressures are outside normal limits.
Safety features include high and low level float level switches, discharge relief valve (set at 100 psid/7 bar), inlet oil
vacuum pressure switch and drip tray float switch.
The HNP fluid conditioning purifier has been designed to be robust and reliable under the most arduous of conditions.
All components are easy to maintain and filter elements are readily accessible for change out.
{sval:sql sql='SELECT n_parameter FROM dede_addonarticle WHERE aid = ~aid~ ' } {/sval:sql}
{sval:sql sql='SELECT n_parameter FROM dede_addonarticle WHERE aid = ~aid~ ' } {/sval:sql}
