HY-PRO HP60L16-1MV Replacement Hydraulic Oil Filter Cartridge High Flow Low Pressure Precision Filtration

Analysis of the core advantages of material technology

The HP60L16-1MV filter element is optimized for the pain points of continuous operation and high flow circulation in large thin oil stations. It adopts an extended cylinder body and a wide folded filter material structure, greatly improving the effective filtration area. Compared with conventional short filter elements, the pollutant holding capacity is increased by more than 40%, perfectly adapting to the working characteristics of large lubrication systems with high flow and high impurity loads, effectively extending the replacement cycle, and reducing the number of shutdowns and maintenance of large equipment.

The filtration accuracy of 16 μ m belongs to the golden precision of lubrication systems, which can efficiently intercept hard metal particles generated by bearing and gear wear, avoid the strain and wear of precision transmission components, and avoid problems such as high flow resistance, insufficient oil supply, increased system back pressure, and high oil temperature due to high accuracy. It precisely matches the filtration requirements of lubrication systems. The filter material is made of high-quality composite glass fiber, cured and shaped with resin, resistant to long-term immersion and corrosion in lubricating oil, structurally stable, and free from deformation and fiber detachment risks.

The fully wrapped metal support mesh provides all-round protection for the filter layer, resisting the continuous impact of high flow oil and avoiding problems such as distortion, collapse, and damage to the long filter body. The end cover is made of thickened anti rust steel plate and adopts a hot melt integrated sealing process, which is suitable for 24-hour uninterrupted operation of the equipment. It will not come off or leak after long-term immersion. The sealing element adopts oil resistant nitrile rubber, which is compatible with the vast majority of industrial lubricating media. It has stable sealing and strong durability, and can be upgraded with fluorine rubber as needed to adapt to high-temperature turbine oil working conditions.

Core technical parameters of the product

Model: HP60L16-1MV (domestic substitute for HY-PRO)

Filtering accuracy: 16 μm

Filter material: multi-layer wide folded fiberglass filter material

Supporting structure: fully wrapped metal inner and outer protective net

Sealing configuration: NBR nitrile rubber seal

Rated working pressure: 1.6MPa (exclusive for low-pressure conditions)

Working temperature: -20 ℃~+95 ℃

Applicable media: industrial lubricating oil, gear oil, turbine oil, circulating hydraulic oil

Structural characteristics: long tube with high flow rate, low pressure difference, ultra-high pollutant capacity

Blockage alarm pressure difference: 0.4MPa

Applicable working conditions and industry scenarios

This model is a low-pressure high flow lubrication special filter element, focusing on the filtration of thin oil circulation in large fixed industrial equipment, and is not suitable for high-pressure pipeline conditions.

1. Thermal power plant: thin oil lubrication station for steam turbine and hydro generator units;

2. Building materials industry: large reducers and lubrication systems for vertical mills in cement plants;

3. Metallurgical industry: lubrication circuits for large rolling mill gearboxes and continuous casting equipment;

4. General Heavy Industries: lubrication systems for large fans, air compressors, and conveying machinery;

5. Circulating oil filtration system for large-scale chemical and papermaking equipment.

Core competitiveness of products

1. Super large sewage capacity: Long tube wide folding structure, suitable for high load impurity filtration in large gas stations, with longer replacement cycles and lower maintenance costs;

2. Low pressure difference and high flux: Suitable for 24-hour continuous circulation oil supply, does not hinder system flow, and eliminates problems such as oil temperature rise and insufficient oil supply;

3. Exclusive precision for lubrication conditions: 16 μ m precisely adapted to the lubrication system, balancing protective effect and flow performance;

4. Stable and fatigue resistant structure: Fully wrapped metal mesh, resistant to long-term high flow impact, suitable for uninterrupted operation conditions;

5. High cost-effectiveness of localization: replacing imported original equipment, sufficient stock, short delivery cycle, significantly reducing annual consumables expenses for large equipment;

6. Strong adaptability: 1:1 replica of original size, direct replacement in situ, no need to modify equipment filter structure.

Factory production and quality control advantages

Our factory has been deeply engaged in the production of large thin oil stations and lubrication system filter elements for many years. For long tube high flow filter elements such as HP60L16-1MV, we focus on optimizing the folding flatness, bonding firmness, and overall coaxiality of the filter material to avoid common industry problems such as twisting, delamination, and unstable pressure difference of long filter elements. Each batch of products undergoes flow pressure stability testing and long-term immersion aging testing to ensure continuous operation of the equipment. Long term service to large industrial enterprises such as power plants, cement plants, and metallurgical plants, supporting annual bulk stocking, engineering support, and foreign trade exports. We can provide a complete set of factory quality inspection data and customized packaging services.

Common FAQ

Q1: Is 16 μm precision suitable for filtering lubricating oil sludge?

A: It can effectively intercept solid metal abrasive particles, dust impurities, block shaped oil sludge can be efficiently filtered, and it is recommended to use a bypass filtration device for fine colloidal oil sludge.

Q2: Can it be adapted for use with turbine oil systems?

A: Sure, regular temperature conditions come standard with rubber seals, while high-temperature turbine oil conditions can be upgraded with fluororubber seals.

Q3: Is it easy for long tube filter cartridges to deform and break?

A: No, the fully wrapped metal support mesh is reinforced in all directions, with strong resistance to flow impact and no risk of deformation or damage under normal working conditions.

Q4: Apart from HY-PRO filter elements, what other oil filtration products do you have?

A: Our factory has a complete line of oil filtration products, which can meet the purification needs of industrial oil products under all working conditions. In addition to the full range of HY-PRO replacement oil filters, we also specialize in PALL, HYDAC, Leemin and other full range oil filters and filters, matched with LYC-A series movable oil filters and oil coalescence dehydration filters, providing one-stop solutions for industrial oil impurity removal and water filtration problems.

Q5: What other filtering categories are included in the factory's main business?

A: Our factory is a one-stop industrial filtration source manufacturer, with main business covering four core areas: industrial oil filtration, industrial water filtration, natural gas filtration, and industrial air filtration. We can customize various imported substitute filter elements, domestic standard filter elements, and complete sets of filtration equipment, suitable for multiple industry scenarios such as power, metallurgy, chemical, gas, and shipbuilding.

You may also be looking for

1. Oil filter machine

2. Coalescer&separator element