0110R010BN4HC Hydraulic Oil Filter Element for Industrial Hydraulic System

Hydraulic return‑loop collects most wear debris produced by cylinders and actuators. The 0110R series replacement hydraulic filter element acts as full interchange return‑line filter element for hydraulic oil‑return circuit. Composite glass‑fiber material of this return‑line filter element traps metal wear debris, seal fragments and various solid contamination particles. This hydraulic oil filter is widely deployed for engineering machinery and injection‑molding equipment return filter housing. It is a cost‑effective spare part for mass industrial hydraulic system maintenance.

Return‑Loop Filtration Working Principle

Contaminated return oil flows inward through pleated 0110R hydraulic filter element. Outer‑layer media captures large‑size wear particles, inner fine‑fiber layer holds micron‑sized impurities. Clean hydraulic oil flows back into oil tank after filtration. Large pleat‑area design improves dirt‑holding capacity of this return‑line filter element, effectively reduces replacement frequency of hydraulic oil filter for return‑circuit system.

Core Technical Parameters

• Filter Media: Composite glass‑fiber for replacement hydraulic filter element

• Available Precision:3 /5 /10 /20 μm for hydraulic filter element

• Max Working Pressure:1.6 MPa for return‑line filter element

• Recommended Replace ΔP:0.35‑0.5 MPa for hydraulic oil filter

• Compatible Housing: Standard return‑line filter housing matching 0110R series dimension

Each 0110R series replacement hydraulic filter element passes media integrity inspection, direct drop‑in interchange for corresponding standard return‑line filter assembly.

Five Core Product Strengths

1 Return‑Circuit Optimized Pleat Design
Large dirt‑holding capacity for return‑line filter element.

2 Stable Composite Fiber Media
Resist oil‑flow impulse for long‑time running hydraulic oil filter.

3 Complete Dimensional Compatibility
Direct swap‑out without modifying original return‑filter housing.

4 Multiple Micron‑Grade Options
3‑20μm optional to satisfy different hydraulic filter element working‑condition.

5 Competitive Sourcing Cost
Domestic manufacturing shortens delivery lead‑time for replacement hydraulic filter element.

Application Scenarios

0110R series replacement hydraulic filter element is widely used in industrial hydraulic station, injection‑molding machine, excavator and other engineering‑machinery oil‑return circuit, keeps internal tank hydraulic oil at required cleanliness level.

Full Model List

Full Model No.	Specification Introduction
0110R003BN4HC	3μm super‑fine replacement hydraulic filter element, high‑cleanliness requirement hydraulic system
0110R005BN4HC	5μm fine‑grade hydraulic filter element, precision industrial hydraulic station
0110R010BN4HC	10μm standard return‑line filter element, general‑purpose oil‑return circuit
0110R020BN4HC	20μm coarse‑grade hydraulic oil filter, heavy‑pollution construction‑machinery

Other Related Products

0240R Series Large Flow Return‑Line Hydraulic Filter Element

FAQ

Q1 What is difference between pressure‑line filter and return‑line filter?
A1 Return‑line filter works under low pressure, collects most system wear particles; pressure‑line filter protects downstream precise hydraulic components.

Q2 Which precision for ordinary injection‑molding machine return oil?
A2 Recommend 10μm grade return‑line filter element for common injection‑molding equipment.

Q3 When replace 0110R replacement hydraulic filter element?
A3 Change filter when differential‑pressure reaches 0.35‑0.5 MPa.

Q4 Can 0110R work for fire‑resistant hydraulic fluid?
A4 Available with special gasket material for fire‑resistant fluid, please remark in inquiry.

Q5 Can I clean and reuse this filter element?
A5 Glass‑fiber depth‑type filter cannot be cleaned for repeated use; must replace after saturation.