Lefilter large flow filter HFU620UY400H single core flux up to 70m3/h, compared with ordinary filter, can greatly reduce the number of filter use, and significantly reduce the size of the supporting shell, so the initial investment cost than ordinary filter system greatly reduced the patented technology of the special folding design, The pressure drop is significantly lower than that of other filter elements and the service life is more than 2-4 times that of ordinary filter elements. The convenient handle on the filter element significantly reduces the cost of replacement in the later period.

The convenient handle on the filter element makes the replacement of filter element simple and convenient. Four kinds of filtration accuracy are provided, respectively 0.5, 1, 5 and 10 microns, which meet the requirements of different accuracy levels. Effectively prevent secondary pollution comes with the skeleton, enhance the pressure resistance of the filter element during the use of the O-ring, to ensure the sealing and reliability of the filter surface filtration and deep filtration combined, thereby reducing the volume of the filter and saving costs, the product has the characteristics of low pressure difference, high pollution capacity, in the use of filter to reduce the number of filter replacement and do not lose, so as to improve work efficiency.

Product features:

Large flow of single filter element

Low installation cost, low operating cost

Large flow filter element replacement number is small

1 micron absolute filtration accuracy

In and out of the filtration method, the impurities are all intercepted in the filter element

No metal frame, minimize the loss caused by discarding

U-shaped sealing groove ensures high filtration efficiency

Technical parameter

Filter material: Glass fiber, polypropylene (PP);

Support/guide layer: polypropylene;

End cover material: glass fiber reinforced polypropylene;

Sealing ring material: ethylene propylene rubber, Teflon coated fluorine rubber.

Filtration accuracy :1μm, 3μm, 5μm, 10μm, 20μm, 50μm, 70μm, 100μm;

High operating temperature: 80℃;

High pressure drop: 3.4Barat82℃

Recommended pressure drop for filter replacement: 2.4Bar, 20℃

Recommended water flow rate: 900LPM

Application field

Large-scale reverse osmosis pretreatment filtration;

Electronic industry high purity water pre-filtration;

Petrochemical industry amine liquid filtration, oil field reinjection water filtration;

Power, coal chemical security filtration, desalination pretreatment.

Other Related Products：

Backwash filter

High Flow Cartridge Filter

High flow filter