INTRODUCTION

The LUC fine oil filter machine - hand-push type has a compact and small overall structure, which is convenient for movement. The specially designed hand-push device enables it to be easily transferred among different working areas, especially suitable for sites with limited space and the need for flexible operation. The outer shell is made of high-quality corrosion-resistant materials, which are sturdy and durable and can cope with complex industrial environments.

The core filtering system is the key highlight. It is equipped with high-precision filter cartridges that have fine and uniform pores and can accurately intercept tiny impurity particles in the oil, such as extremely fine metal chips and dust, effectively improving the purity of the oil. The operation panel is simple and easy to understand. Operators can conveniently adjust key parameters such as the filtering speed and pressure without the need for complicated training, greatly improving the convenience and universality of the equipment's use and meeting the fine filtering needs of various oil products.

ANALYSIS OF THE CORE WORKING PRINCIPLE

Initial Filtration Stage

After the oil enters the oil filter machine, the initial filtration stage begins. In this stage, relying on the relatively large filtering area of the filter cartridge, it first intercepts the relatively large visible impurities in the oil. It's like a "first line of defense", preventing these large particle impurities from entering the subsequent more refined filtering areas, avoiding blockages or damage to the precision filtering parts, and also laying the foundation for the subsequent in-depth filtration.

Fine Filtration Stage

The oil that has undergone the initial filtration then enters the fine filtration stage. At this time, the high-precision filter cartridge begins to play a core role. Its fine pore structure can capture those extremely tiny impurities in the oil. Through physical screening, adsorption, and other methods, the tiny particles are firmly adsorbed on the surface of the filter cartridge. After passing through this stage, the impurity content in the oil is greatly reduced, and the purity is significantly improved, meeting the usage requirements of equipment for high-quality oil products.

Circulation Filtration Mechanism

The LUC fine oil filter machine - hand-push type adopts a circulation filtration mechanism. It continuously extracts the oil for filtration and then sends it back to the oil container or directly transports it to the corresponding equipment. Through multiple cycles, even trace impurities that are extremely difficult to remove can be gradually removed under the repeated filtering effect, ensuring that the oil is always in an ideal fine and pure state and guaranteeing the stable and efficient operation of the equipment.

TECHNICAL PARAMETERS

Filtration Accuracy

The LUC fine oil filter machine - hand-push type has multiple filtration accuracy options available, with a range between 1 micron and 10 microns, which can accurately match the strict requirements for the purity of oil products in different scenarios. For application scenarios with extremely high requirements for oil cleanliness, such as aerospace equipment and high-end precision instruments, an ultra-fine filtration accuracy configuration of 1 - 3 microns can be selected, which can accurately remove almost all tiny impurities invisible to the naked eye in the oil, ensuring that the oil reaches an almost perfect purity and providing a solid guarantee for the stable operation of these precision equipment. For general industrial equipment, such as ordinary machine tools and small construction machinery, a filtration accuracy of 5 - 10 microns is sufficient to meet the basic fine oil filtration needs, ensuring the normal operation of the equipment while taking into account the filtering efficiency and cost control.

Flow Rate Range

The flow rate range of the equipment fully considers the diverse needs in actual use. The minimum flow rate can be as low as 5 liters per hour, which is suitable for small equipment maintenance and fine processing scenarios where the oil consumption is low but the requirement for filtration accuracy is high, such as small laboratory equipment and the lubrication systems of precision electronic equipment. The maximum flow rate can reach 100 liters per hour, mainly targeting situations where equipment is relatively concentrated in some small and medium-sized industrial production workshops and needs to complete the fine oil filtration in a timely manner, such as small mechanical processing factories and auto repair workshops, so as to ensure that the oil can be filtered and supplied to the equipment in a suitable time and avoid affecting the normal production or equipment operation.

Working Pressure

The normal working pressure interval of this oil filter machine is set between 0.1 MPa and 0.8 MPa. Within this pressure range, the equipment can operate stably to ensure that the oil can smoothly pass through the filtering system for fine filtration. The reasonable pressure design not only ensures the smooth progress of the filtering process but also prevents damage to the filter cartridges and other filtering components due to excessive pressure, extending the service life of the equipment. Meanwhile, for some special high-pressure application scenarios, some models that have undergone special strengthening treatment can withstand a maximum working pressure of up to 1.2 MPa, meeting the pressure requirements for fine oil filtration under special circumstances.

Motor Power

Different models of the LUC fine oil filter machine - hand-push type are equipped with motors of corresponding power. The motor power range is roughly between 0.25 kW and 1.5 kW. Motors with lower power are suitable for oil filtering work scenarios with small flow rates and light loads. They have the advantages of energy saving and low operating noise and can provide stable power for the fine oil filtration of small equipment. Motors with relatively higher power are used to deal with situations where the flow rate is slightly larger and the load is heavier, ensuring that the oil filter machine can operate efficiently and stably when processing relatively more oil, ensuring the smooth progress of the entire fine oil filtration process.

Applicable Oil Temperature Range

Considering the temperature differences of oil products in different industrial environments, the LUC fine oil filter machine - hand-push type has a relatively wide applicable oil temperature range and can usually work normally under the oil temperature conditions between -5°C and 100°C. This means that whether it is in the cold outdoor working environment in winter or in the high-temperature indoor production workshop, it can effectively filter the oil without the performance and filtering effect of the equipment being affected by changes in oil temperature, further enhancing the adaptability and universality of the equipment.

Filtration Efficiency

Under standard working conditions, for impurities with particle sizes larger than the selected filtration accuracy, the one-time filtration removal rate of this oil filter machine can reach more than 95%. After multiple cycles of filtration, the improvement effect on the overall purity of the oil is significant, which can reduce the impurity content in the oil to an extremely low level, effectively ensuring the high quality of the oil used by the equipment and providing strong support for the stable operation and extended service life of the equipment.

SELECTION POINTS AND APPLICABLE SCENARIOS

Selection Based on Oil Product Usage

Different equipment for different purposes has different requirements for the purity of oil products. Therefore, when selecting the LUC fine oil filter machine - hand-push type, it is necessary to fully consider the specific usage of the oil products. If it is used for high-precision equipment, such as electronic chip manufacturing equipment and optical instruments, it is necessary to choose the model with the highest filtration accuracy to ensure the ultra-fine purity of the oil. For the lubrication and hydraulic systems of ordinary industrial equipment, models with relatively moderate filtration accuracy can be selected according to the actual situation to balance the cost and filtration effect.

Selection Based on Flow Rate Requirements

The flow rate requirements of equipment for oil in various industrial scenarios vary greatly, which is one of the key considerations in the selection process. In scenarios where small equipment is concentrated and the total oil consumption is not large, such as small electronics factories and handicraft workshops, it is advisable to choose models of oil filter machines with a smaller flow rate to avoid resource waste and accurately meet the filtering needs. For places where the oil consumption is relatively large and needs to be filtered in a timely manner, such as auto repair shops and small mechanical processing workshops, models with a larger flow rate should be selected to ensure the timeliness of oil supply.

Consideration of Working Environment Factors

The complex industrial environment requires that environmental factors be fully considered when selecting equipment. If the working environment has a lot of dust, corrosive gases, and other situations, such as chemical workshops and open-pit mines, it is necessary to choose oil filter machines with good corrosion resistance and dustproof capabilities of the outer shell and internal components to ensure that the equipment can operate stably for a long time. In high-temperature or low-temperature environments

Adaptation to Different Application Scenarios

The LUC fine oil filter machine - hand-push type, with its excellent performance, is applicable to many different application scenarios. In the manufacturing industry, it can provide finely filtered oil for the lubrication and hydraulic systems of various machine tools and processing equipment, ensuring the processing accuracy and operational stability of the equipment. In the transportation industry, it can be used for filtering engine oil and fuel oil of vehicles and ships, improving the safety and reliability of their operation. In the energy industry, it can also conduct fine treatment on the oil of some small equipment, helping to ensure the stable operation of energy production.

Extensive Applications and Important Values in Various Industries

Manufacturing Industry

In the manufacturing industry field, the high-precision processing and stable operation of equipment are inseparable from pure oil products. The LUC fine oil filter machine - hand-push type can conduct fine filtration on the lubricating oil and hydraulic oil used by machine tools, processing centers and other equipment, removing tiny impurities in them, avoiding problems such as equipment wear and jamming caused by impurities, improving the processing accuracy of products, reducing the number of equipment maintenance times, ensuring the efficient and smooth progress of the production process, and thus improving the economic benefits of enterprises.

Transportation Industry

For transportation vehicles, clean oil products are the key to ensuring their normal operation and extending their service life. This oil filter machine can conduct fine filtration on engine oil and fuel oil during the maintenance of vehicles and ships, removing impurities, making key components such as engines run more smoothly, reducing fuel consumption, reducing exhaust emissions, improving transportation safety, and promoting the green and healthy development of the transportation industry.

Energy Industry

In the energy industry, some small equipment also needs high-quality oil products to maintain normal operation. The LUC fine oil filter machine - hand-push type can conduct fine filtration on the oil of these equipment, ensuring the quality of the oil products, reducing the risk of equipment failures caused by oil impurities, ensuring the stability of the energy production process, improving energy utilization efficiency, and helping the industry to achieve sustainable development.

Other Industries

In addition to the above industries, it also has a wide range of applications in industries such as construction and mining. The quality of oil products for construction machinery in the construction field affects the performance of the equipment. Using this oil filter machine can ensure the purity of the oil products and ensure that the construction progress will not be affected. Mining equipment is in a harsh environment for a long time, and the oil filter machine can purify the oil products, reduce the failure rate of the equipment, improve the utilization rate of the equipment, and promote the smooth progress of production in the industry.

QUALITY ADVANTAGES AND MARKET PROSPECTS OUTLOOK

The reason why the LUC fine oil filter machine - hand-push type can stand out in the market lies in its many significant quality advantages. It has high-precision filtering capabilities, can quickly and accurately remove impurities in oil products, ensure the quality of oil products, and provide strong support for the stable operation of equipment. Its operation is simple and convenient, reducing the professional requirements for operators, and has strong universality and a wide range of applications. Moreover, the equipment has good stability. After strict quality inspections and actual verification in working conditions, it can work stably for a long time, reducing the downtime and maintenance costs caused by equipment failures.

With the continuous development of industry and the increasing attention of enterprises to equipment maintenance and upkeep, the demand for fine oil filtration equipment is continuously growing. The LUC fine oil filter machine - hand-push type, with its unique portability, efficient filtering performance and reliable quality, undoubtedly has broad development prospects in the future market. It will continue to provide high-quality fine oil filtration solutions for various industries, helping industrial production move towards higher quality and more sustainable development.