Home News & Events INDUSTRY INFORMATION GROUP NEWS

ALN05-60B high flow filter element: a new chapter in industrial filtration technology

DATE:2024-02-29Number of views: Source:LEFILTER

The ALN05-60B high-flow filter element is a high-efficiency filtration equipment, and its importance in the filtration field cannot be ignored. Whether in domestic water use or various industrial applications, the requirements for water quality are constantly increasing. ALN05-60B high flow filter element has become an ideal choice in many fields with its excellent filtration performance and large flow characteristics.

The ALN05-60B high flow filter element is designed with practicality and efficiency in mind. It adopts a depth filtration design to accurately filter out impurities, sediments, suspended solids and bacteria in the water through multiple layers of fine polypropylene or fiberglass membranes. In addition, the ALN05-60B high-flow filter element is also equipped with a large-diameter design, which increases the flow rate to twenty times that of conventional filter elements. This design is not only able to handle larger volumes of water, but also requires less frequent replacement, reducing maintenance effort and operating costs.2

The introduction of ALN05-60B high-flow filter element has changed the design and operation of filtration equipment to a great extent. In the past, if the processing capacity increased, the number of corresponding filter elements and the size of the equipment would also increase, which were subject to dual limitations of space and cost. The use of ALN05-60B high-flow filter element allows us to process a larger volume of water in smaller equipment, which has a great impact on equipment design and investment cost management.

Globally, ALN05-60B high-flow filter element has been favored and adopted by various fields. Whether it is the purification of drinking water, water quality control in industrial production processes, or even special applications such as seawater desalination, the ALN05-60B high-flow filter element has demonstrated excellent performance. Among them, seawater desalination is a very important application field. As global freshwater resources become increasingly scarce, the demand for seawater desalination is increasing. The ALN05-60B high-flow filter element can provide a large dirt holding capacity and a long replacement time for seawater RO systems, providing good protection.

In short, the ALN05-60B high-flow filter element occupies an important position in the field of filtration. Its design and performance have changed the way traditional filtration equipment operates, improving filtration efficiency, reducing operating costs, and bringing effective solutions to global water treatment needs. In the future, the ALN05-60B high-flow filter element will also play a greater role in meeting human needs for high-quality water resources.

4

ALN05-60B High Flow Filter Element Versatility and Efficiency


The ALN05-60B high-flow filter element is a high-efficiency filtration equipment that is widely recognized and used in the filtration field for its versatility and high efficiency. Below we will introduce these two characteristics in detail.

The first is versatility. The ALN05-60B high-flow filter element is not only suitable for filtration of river water mixed with sediment, but also suitable for the treatment of industrial wastewater containing various types of particles. Moreover, it can also be used as a pre-filtration device to provide protection for subsequent fine filtration devices. The advantage of this design is: there is a wide range of filter materials, and filter elements with different performances can be selected according to the water source quality to meet the requirements of different precision levels.

Another distinguishing feature is its high efficiency. The ALN05-60B high-flow filter element has a large-diameter structure, and with its unique internal and external flow path design, it significantly increases the filtration speed, allowing a single filtration capacity to reach 70m3/h. This not only improves the filtration efficiency, but also effectively reduces the size of the equipment, thereby reducing equipment investment costs and reducing the equipment footprint.3

The ALN05-60B high-flow filter element is also easy to install and replace. Its convenient handle design significantly reduces the time to replace the filter element, making the replacement of the filter element simple and convenient. This means a lot of time and labor costs can be saved in the maintenance and operation of the equipment.

Finally, we cannot ignore its economic advantages. Due to its high-efficiency filtration capacity, combined with its long life and sturdy structure, it rarely needs to be replaced during operation, greatly reducing the operation and maintenance costs of the equipment.


Basic characteristics and advantages


Basic characteristics of ALN05-60B high flow filter element, including materials, design details and capacity

The ALN05-60B high-flow filter element demonstrates the essence of modern filtration technology, with excellent performance and excellent functionality. In order to bring a more comprehensive understanding, we will describe the characteristics of this filter element in detail, paying special attention to its materials, design details and capacity.

First of all, the ALN05-60B high-flow filter element is made of special materials and can withstand greater working pressure. It has the characteristics of high filtration precision and large dirt capacity. The use of this special filter material not only ensures the stable operation of the filter element, but also enhances the service life of the filter element.

Secondly, the design details of the high-flow filter element are commendable. The most striking feature is its large diameter construction. In addition, this type of filter element does not have a central rod, and its design adopts a single-port design, which greatly improves its filtration efficiency. In addition, due to the increase in filter area, the number of filter elements and filter size can be reduced, making it widely applicable in various applications. In addition, its multi-stage filter layer structure, including the design of the guide layer, multi-stage pre-filter layer, final filter layer and guide layer, significantly improves the dirt holding capacity and use of the filter element through layered interception of particulate impurities. life.3

Once again, the ALN05-60B high-flow filter element has amazing processing capabilities. The most eye-catching data is that the flow rate of a single filter element can reach up to 300gpm/70m3/h. This flow rate far exceeds the processing capacity of many traditional filter elements. The high efficiency and huge processing capacity of the ALN05-60B high-flow filter element make it possible to easily complete the task in a large-scale filtration process without using multiple traditional filter elements. Only a small amount of ALN05-60B high-flow filter element is needed.


The unique advantages of ALN05-60B high flow filter element

ALN05-60B high-flow filter element is a high-efficiency filtration equipment with three unique advantages: large flow, high efficiency and long life.


First, challenging working environments require filter elements with higher flow rates for fast and effective filtration. The ALN05-60B high flow filter element performs exceptionally well in this regard. Using a specially designed large-size structure and center-rod-less design, its single filtration capacity can reach an astonishing 300gpm (approximately 70m³/h), greatly improving filtration efficiency. The speed and effect of screening have been significantly improved, making the ALN05-60B high-flow filter element undoubtedly the most suitable choice for applications requiring high-flow filtration.


Second, the ALN05-60B high-flow filter element also has significant performance in filtration efficiency. It has a unique multi-stage filter layer structure, which achieves a filtration efficiency of over 99% through layered interception of particulate impurities. You must know that this is a performance in which the filter element can achieve extremely high flow rates while maintaining excellent filtration effects, which shows its unparalleled efficiency.


Finally, extending the service life of filter elements has been a topic that users and manufacturers have been exploring for a long time. For users of the ALN05-60B high flow filter element, this is no longer a problem. This filter element is made of special materials with high impact resistance and high pressure resistance, ensuring that it has a longer service life in harsh working environments. Not only that, the ALN05-60B high-flow filter element is easy to replace, which significantly reduces the time and energy required to replace the filter element, further extending its life in actual use.


Through the above discussion, we can clearly see the unique advantages of the ALN05-60B high-flow filter element in terms of large flow, high efficiency and long life. Whether in industry or life, this means that the ALN05-60B high-flow filter element can provide higher quality and more efficient filtration services to meet the increasing needs of users.

5

Working principle and application scope


The working principle of ALN05-60B high flow filter element, explaining how it achieves effective cleaning


The working principle and cleaning effect of the ALN05-60B high-flow filter element are achieved through its unique structure and filter material, which can effectively remove impurities, sediments, suspended solids and bacteria in the water.

The large-flow filter element filter is equipped with a large-flow filter element and works under pressure. The raw liquid is filtered through the filter element. The filter residue remains on the wall of the filter material, while the filtrate flows out through the filter element, effectively removing impurities, sediments, suspended solids, and bacteria in the water.

The filter membrane of the high-flow cartridge filter adopts a pleated deep structure. This filter membrane design increases the effective filtration area, so in many applications it has large flow rates, long filtration life, and reduced replacement times, which can greatly reduce investment and labor costs. . Moreover, the large-flow filter element has no central support frame and is open at one end. The filtered fluid flows from outside to inside. The large diameter design of the filter element and the increased effective filtering area can greatly reduce the number of filter elements and reduce the size of the shell.

An important feature of this filter element is its gradient pore structure. Under the action of external force, after the liquid in the suspension enters the filter element equipped with a filter screen of a certain size, its impurities are blocked, and the clean liquid flows out through the filter element, thereby achieving separation.

ALN05-60B high-flow filter element also has different characteristics from traditional PP melt-blown filter elements. The large-flow filter element it uses has a maximum water volume of up to 50m3/H in a single outlet. In terms of water flow, one 40" high-flow filter element is equivalent to 20 PP Melt blown filter element.


ALN05-60B high flow filter element is used in many fields


The ALN05-60B high-flow filter element has broad application prospects in many fields due to its unique design and high-efficiency filtration capabilities. The following are some application cases:

Applications in chemical plants: Factories need to deal with various chemical substances and wastewater problems, which require efficient filter elements for cleaning and filtration. Since the ALN05-60B high-flow filter element has high-efficiency filtration capacity and large water flow, it is particularly suitable for use in chemical plants. It is a piece of equipment commonly used in chemical plants.

Application in the pharmaceutical industry: In the pharmaceutical industry, product purity and safety are two very important aspects. In this process, the ALN05-60B high-flow filter element can effectively filter out various bacteria and impurities in the production and research and development processes, ensuring the quality and safety of the final product.ALN05-60B

Application in power plants: In power plants, water quality safety and cleanliness also play an important role in production. The ALN05-60B high-flow filter element can effectively remove impurities in water, providing a strong guarantee for the normal production of power plants.

Application in petrochemical industry: The production process of petrochemical industry is often accompanied by a large amount of oil-water mixture. The ALN05-60B high-flow filter element can achieve an absolute filtration efficiency of 99.9% in this process and has strong dirt-holding capacity, making it an indispensable auxiliary equipment in the petrochemical industry.


Global perspective: Application of ALN05-60B high flow filter element in the context of globalization


How to apply ALN05-60B high flow filter element in various industries around the world


First, let’s look at the chemical industry. In the chemical industry, the problem of processing large amounts of waste liquid, waste gas and waste residue is particularly prominent, and it is necessary to reduce the impact of undesirable substances on the environment as much as possible. In this case, the ALN05-60B high-flow filter element can effectively remove various impurities and bacteria in wastewater through its excellent filtration performance, which has a direct effect on improving the environment. At the same time, the large flow design of ALN05-60B also enables it to process large amounts of wastewater. For large chemical companies, this undoubtedly greatly improves wastewater treatment efficiency and reduces operating costs.

Next is the petrochemical industry. In the petrochemical industry, a large amount of oil-water mixture is generated during the refining and production of petroleum and chemical products. In this case, the absolute filtration efficiency of the ALN05-60B high-flow filter element is as high as 99.9%. It can not only effectively remove impurities in oil and water, but also efficiently separate oil and water, creating a clean and safe production environment for subsequent processes.

The pharmaceutical industry is also an important application field for ALN05-60B high flow filter element. In the pharmaceutical industry, there is no doubt that product safety and purity are of paramount importance. The ALN05-60B high-flow filter element is like a reliable gatekeeper. Tiny bacteria and impurities cannot pass through its precise filter layer. It ensures the cleanliness and sterility of the medicinal solution and protects the health of the patient.

In the power industry, whether it is thermal power generation or nuclear power generation, a large amount of pure water is needed as a coolant and medium. At this time, the ALN05-60B high-flow filter element is an indispensable piece of equipment for the power plant. It helps the power plant effectively filter out impurities in the water and ensures the stable operation of the power generation equipment.

In addition, ALN05-60B high flow filter element is also widely used in many other industries. In the food and beverage industry, the ALN05-60B high-flow filter element can ensure the cleanliness and safety of food and beverages; in the electronics industry, the ALN05-60B high-flow filter element can effectively filter impurities in circuit board cleaning water and ensure the quality and performance of circuit boards; in the water industry, large The flow design enables ALN05-60B to meet the needs of large water plants and ensure the cleanliness and safety of water supply.ALN05-60B 1

To sum up, the ALN05-60B high-flow filter element has an extremely wide range of applications. Its high-efficiency filtration performance, large flow rate, long life and other characteristics enable it to find application scenarios in various industries around the world. Moreover, with the improvement of people's environmental awareness, the ALN05-60B high-flow filter element also has great application prospects in the field of environmental protection.


The outstanding performance of ALN05-60B high flow filter element and the benefits it brings


ALN05-60B high-flow filter element, as a highly praised product in the filtration equipment market, is widely used in various industries around the world due to its excellent filtration performance and multi-faceted advantages. Next, we will comprehensively discuss its outstanding performance and the potential benefits it brings to you, hoping to guide you to choose to use ALN05-60B high flow filter element.


First of all, from a performance perspective, the ALN05-60B high-flow filter element has unparalleled filtration effect. It uses special design and materials to effectively remove suspended particles, pollutants, bacteria and other impurities in the water. Especially in terms of filtering out tiny particles, ALN05-60B has an absolute filtration efficiency of up to 99.9%, making it undoubtedly the leader in the filtration equipment market.


In addition, large flow rate is a highlight of ALN05-60B. This design allows it to handle a large amount of liquid in a short time, greatly improving work efficiency. Compared with other filter elements, ALN05-60B can reduce the filtration cycle and save valuable time in your production process.


Furthermore, the service life of ALN05-60B is also very significant. Its durability is excellent and its actual service life is far longer than other similar products. This will save you the cost of replacing the filter element and eliminate the trouble caused by frequent replacement of the filter element.


Now, let’s focus on the specific benefits that the ALN05-60B high-flow filter element brings to you.


First of all, choosing to use ALN05-60B series products can ensure the quality of your final product. No matter what industry you are in, no matter what type of liquid you need to handle, the ALN05-60B can provide a solution to meet your needs, ensuring that your products are clean and pure.


Secondly, ALN05-60B can create a more efficient workflow for you. The large flow design allows you to filter a large amount of liquid at one time; the durable material and design reduce the number of times you replace the filter element. The combination of these two points allows you to save a lot of time and energy.


Finally, choose ALN05-60B, you will get higher economic returns. While the initial investment may be higher, given its long lifespan and excellent filtration, it will actually save you significant operating costs in the long run.


In general, the ALN05-60B high-flow filter element has won the favor of the majority of users with its powerful filtration performance, large-flow design and long service life. Whether you are in the chemical, electric power, pharmaceutical, food and beverage industries, or in a research institution, ALN05-60B can provide excellent filtration solutions. For the sake of your product quality, work efficiency and economic interests, choosing ALN05-60B high flow filter element will be a wise choice.