Introduction:

The oil must be purified before being injected into the system. The pollution degree of raw new oil often exceeds the requirements of the actual hydraulic regulations. Even the new oil just extracted from the oil tank is not suitable for direct use. New oil may be mixed with various pollutant particles and moisture in the process of processing, blending and storage.LYC series high-precision oil filter is an ideal equipment for pre filtration, oil filling and) purification of system oil.

Operation:

1. The machine consists of a motor-driven gear pump, dedicating low noise, strong self-absorption capacity, and smooth running characteristics.

2. The high-pressure pipe with overflow protection devices, which can effectively protect the safety of the hydraulic system.
3. The use of thermal relay protection to prevent motor damage caused by motor overload.
4. Coarse filtration of suction port can protect the pump and extend the life of the main filter.
5. After the pump has two precision filters, so the oil can quickly reach high cleanliness.
6. First precision filter can filter out the larger particles of impurities, and secondary precision filter can filter out smaller particles or moisture.
7. The precision filter chosen by different users for different precision, can provide better protection for the system.
8. Precision oil filtration housing with quick open structure, which can quickly open the cover and replace the filter without any tools.
9. Pressure gauge equipped on the panel, can show the continuous indication of the degree of contamination of the system operating conditions and filter.

Technical parameters:

LYC-A Series High-precision oil filter

Temperature (°C)：5-80

Recommended viscosity(CSt)：10-160

Rated pressure(MPa)：0.6

The original pressure loss(MPa)：≤0.01

First coarse filtration accuracy(μm)：100

Secondary precision filtration accuracy(μm)：3、5、10、20、40

Voltage(V):AC 380V Three-phase power, AC220V Two-phase electricity

LYC-B Series High-precision oil filter

Temperature (°C)：5-80

Recommended viscosity(CSt)：10-160

Rated pressure(MPa)：0.6

The original pressure loss(MPa)：≤0.01

First coarse filtration accuracy(μm)：10、20、40

Secondary precision filtration accuracy(μm)：3、5、10、20、40

Voltage(V):AC 380V Three-phase power, AC220V Two-phase electricity

Other Related Produsts:

LUC series oil filter machine

LYC-J Series Coalescence dehydrated oil filter cart