NEWS
Position:主页 > News > Industry news >

RO Nanofiltration elements for seawater usage

Browsing volume:0

RO system Nanofiltration 8" Membrane Elements

RO membrane elements deliver a spiral wound design that is based on the FT30 thin-film composite polyamide membrane, which has remained as the industry standard for reverse osmosis performance. The RO Nanofiltration membrane possesses three layers: an ultra-thin polyamide barrier layer, a microporous polysulfone interlayer, and a high-strength polyester support web. The nanofiltration membrane has been steadily refined to produce higher rejection, greater membrane flux, and low fouling attainment. The current stock of Filmtec nanofiltration membranes are purely constant in condition and performance, without the taped or glued defects that can bring about membrane failure. Sufficient understanding and implementation of the functions of reverse osmosis can reduce troublesome and costly issues in the future.

RO membrane filter design

The nanofiltration membranes are designed for eliminating high percentages of TOC and THM precursors with medium to high salt passage and medium hardness passage. The RO nanofiltration membrane is an appropriate option for surface water and groundwater where efficient organic elimination is needed with partial softening.

Accurate implementation of reverse osmosis water purification systems is crucial to assemble the membranes for operational performance and to avert membrane failure due to overfeeding or hydraulic shock. Following the accurate implementation sequence also increases the likelihood of system operating parameters conforming to design specifications so that the quality of water and productivity objectives can be met.

Filmtec nanofiltration membranes are designed to completely eradicate sulfate from saltwater for the purposes of efficient oil production, and other applications. This nanofiltration membrane remains at a high performance during operation at low pressures, and sufficiently eradicates substances greater than .001 microns. The end result is highly clean water that is free of all silica, bacteria, and other microorganisms.

RO nanofiltration membranes are designed to allow for easy separation of organics and saline for wide-reaching industrial and municipal water purification systems that turn out greater than 12 gallons per minute of permeate. These elements are perfect for water treatment operations that require ultrapure permeate water that is free of certain contaminants such as iron, nitrates, salts, and organic substances.


Nanofiltration filter element


Advantages:

· Provides easy cleanability and high productivity
· Nanofiltration technology efficiently eliminates characteristics and color during low pressures
· Less energy consumption
· Lower risk of o-ring leakages
· Decrease in operational cost
· Organic substances are removed with water softening

RO membrane

RO Membranes
Tapwater Commercial RO  2.5"x40” and 4"x40” membranes, TW30, XLE, LP, BW30, TW30HP
Tapwater Industrial RO  4”x40” and 8”x40” membranes, l BW30, BW30LE, LE, XLE, FR, RO, HSRO
Seawater RO Elements  2.5"x40”, 4”x40” and 8"x40” Seawater membranes, SW30, SW30HR, SW30HRLE
Nanofiltration Elements  4”x40” and 8"x40” Nanofiltration membranes, NF90, NF270, NF200, NF
Semiconductor Grade  8" Dia. Semiconductor SG, SG30


seawater filter cartridge
Filtration Technology Corporation

No. 9 Hongli Road,Muye District,Xinxiang City,Henan Province,China.
Phone: +86 373 2618077

DOWNLOAD LOCATION MAP

Contact

If you are interested in our company and our products, welcome to our company or our local office to visit, you can also call advice, our staff will provide you with the product information and application knowledge, so that you will not only get the value of the new equipment, but also get the good service of lefield.

CONTACT US
NEWSLETTER
Яндекс.Метрика