DFB PRESSURE FILTER FOR PLATEF CONNECTION SERIES

1.INTRODUTION

     DFB series filter is of high pressure type, and used in the pressure line of hydraulic system. It can remove all the
contaminants from the hydraulic system. The element of this series is made of glass fibre., it has high efficiency and
filtration, large dirt capacity and low initial pressure drop. Bate ratio is over 200.
It has two protection and equipemnt which are by-pass vavle and contamination indicator. The indicator will act
when the pressure drop across element attains adjustable pressure. The element should be cleaned or changed in time.

2. MODEL CODE

 

3.TECHNICAL DATA

 

Model	Dia (mm)	Flow (L/min)	Filtr (um)	Press (Mpa)	Pressure loss(Mpa)		Indicator power(v/w)	Model of element	O-ring
					Initial	Max
DFB-H30X*C	16	30	3 5 10 20 30	32	≤0.1	0.5	220v/50w	DF0030D*BN3HC	24X2.4
DFB-H60X*C	20	60						DF0060D*BN3HC	32X3.1
DFB-H110X*C		110						DF0110D*BN3HC
DFB-H160X*C	32	160						DF0160D*BN3HC	40X3.1
DFB-H240X*C		240						DF0240D*BN3HC
DFB-H5330X*C		330						DF0330D*BN3HC
DFB-H500X*C		500						DF0500D*BN3HC
DFB-H660X*C		660						DF0660D*BN3HC

 
 
















NOTE:* is filtration accuracy,if the fluid is water-glycol ,usage pressure 32PMPA,flow rate 160L/min,filtration
accuracy 10 um and with CS-III Indicator,The model of the filter is DFB.BH-160X10C,The model of element is DF0060D010BN3HC