Coalescer Technical Information
The SepraSol Plus Liquid/Gas Coalescer
– no longer just for polishing
Before the development of the SepraSol Plus liquid/gas
coalescer, high-efficiency liquid/gas coalescers were used
specifically for polishing.
Generally, if the liquid influent concentration was greater
than a few hundred ppmw, a bulk separator such as a
knock-out drum, mist eliminator, or vane separator was
required upstream of the coalescer to remove large liquid
droplets and a coalescer would be used to remove the
small droplets (less than 5 micron).
As demonstrated below in Figure 1, the SepraSol Plus
liquid/gas coalescer can handle high liquid loads, often
eliminating the need for upstream bulk removal equipment.
In addition to the benefits of our media, the SepraSol Plus
liquid/gas coalescer also includes features that have been
Pall coalescer standards for many years.